{"title":"MXLR","description":"\u003cp\u003eMXLR\u003c\/p\u003e","products":[{"product_id":"carbon-fiber-charger-power-supply-stand","title":"MXLR Carbon Fiber Charger\/Power Supply Stand FIRST EDITION","description":"Carbon Fiber Charger\/Power Supply Stand","brand":"MXLR","offers":[{"title":"Default Title","offer_id":32016551379047,"sku":"MXLR-04-001","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/MXLR-Charger-Stand-11.jpg?v=1762466516"},{"product_id":"mxlr-awesomatix-caster-tool-4pcs","title":"MXLR Awesomatix Caster Tool (4pcs)","description":"\u003cp data-mce-fragment=\"1\"\u003eWith the advanced suspension geometry of Awesomatix cars you can set caster, camber and toe by adjusting the turnbuckles. \u003cbr data-mce-fragment=\"1\"\u003e With the help of a 1\/10 scale setup system it's possible to visualize these values. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo correctly set the caster of your Awesomatix TC you need our MXLR Awesomatix Caster Tools.\u003cbr data-mce-fragment=\"1\"\u003e Just release the outer round head screw on top of the wheel hub (AM06), and slide in the Caster Tool. \u003cbr data-mce-fragment=\"1\"\u003e Now you are able to read and set the caster according to the scale of the used setup system.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our Caster tools are machined from high quality black anodized aluminum with silver edges and laser engraved logo to underline our key philosophy. They will fit all Awesomatix TC cars beside the very first A700 model from 2011. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Compatible with following 1\/10 scale setup systems: \u003cbr data-mce-fragment=\"1\"\u003e - HUDY Aluminum 1\/10 TC Setup System \u003cbr data-mce-fragment=\"1\"\u003e - G-FORCE Aluminum 1\/10 TC Setup System \u003cbr data-mce-fragment=\"1\"\u003e - SKYRC Aluminum 1\/10 TC Setup System \u003cbr data-mce-fragment=\"1\"\u003e - ARROWMAX Aluminum 1\/10 TC Setup System (V2 \u0026amp; LE)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e MAX-02-001 contains: \u003cbr data-mce-fragment=\"1\"\u003e 4x Awesomatix Caster Tool\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":33179224178791,"sku":"MAX-02-001","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot_2021-02-10MXLR-MAX-02-001-AwesomatixCasterTool_4pcs_f394b253-9682-45e1-8fe4-bc5b64a10455.png?v=1645722636"},{"product_id":"mxlr-awesomatix-tc-multi-tool-2pcs","title":"MXLR Awesomatix TC Multi Tool (2pcs)","description":"\u003cp data-mce-fragment=\"1\"\u003eTo unlock the full performance of the Awesomatix TC cars and further simplify the maintenance you should have the MXLR Awesomatix TC Multi Tool in your pit box! \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese tools are designed by the infinite experience of Awesomatix Team Manager Max Mächler. \u003cbr data-mce-fragment=\"1\"\u003e The tool set combines ALL useful and needed tools in just two lightweight and precious looking wrenches.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur wrenches will help to build and maintain the universal driveshafts, the gear diff and dampers with std. cups as well as with ADC cups. Experience and knowledge are the highest value when it comes to the production of specialized tools. A small example is the enlarged cavity for the AT40-1 cups which allow the oil to flow out easily at screwing of the cup to not build up any extra pressure inside the damper which may move the P63\/P45R piston out of his initial position. This is the small but huge difference between perfection and just creating a tool without knowledge like some others.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our TC Multi Tools are machined from high quality black anodized aluminum with silver edges and laser engraved logo as well as the Awesomatix part numbers on top and lower side for an easy identification.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn short, the MX Multi Tool for Awesomatix TC can be used to:\u003cbr data-mce-fragment=\"1\"\u003e - tight\/untight ST38 nuts of ST17-1 universal driveshafts\u003cbr data-mce-fragment=\"1\"\u003e - hold ST17-1 universal ring to open the opposite ST38 nut \u003cbr data-mce-fragment=\"1\"\u003e - tight\/untight AT40 and AT40-1 Damper Cup\u003cbr data-mce-fragment=\"1\"\u003e - tight\/tighten AT40-ADC Damper Cup \u003cbr data-mce-fragment=\"1\"\u003e - tight\/tighten AT124B \/ AT123B (also useable for AT123 of A700 GD2)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e MAX-02-002 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x Awesomatix Multi Tool A\u003cbr data-mce-fragment=\"1\"\u003e 1x Awesomatix Multi Tool B\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":33179224309863,"sku":"MAX-02-002","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot_2021-02-10MXLR-MAX-02-002-AwesomatixTCMultiTool_setof2pcs_dcfd844b-3573-498a-9bf1-8218466ef445.png?v=1645722641"},{"product_id":"mxlr-precision-wing-mount-set","title":"MXLR Precision Wing Mount Set","description":"\u003cp data-mce-fragment=\"1\"\u003eThe wing position greatly affects the handling of your car. It's a powerful setup option to adjust your car to certain grip conditions and track layouts. Mounting the wing correctly and especially straight isn't as easy, but very important!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e For this reason we developed the Precision Wing Mount set to help with the correct and repeatable mounting. \u003cbr data-mce-fragment=\"1\"\u003e Our CNC machined aluminum drill jig fits perfectly in the wing mount of the bodyshell which allows to precisely drill the mounting holes for the wing. The included Ti-coated 3.0mm drill bit is guided by the alloy jig during this process. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Furthermore, the set consists of eight Precision Carbon Wing Mount Plates as well as four M3x8 PA screws and eight M3 PA nuts for the optimal wing attachment. As the wing sit high on the bodyshell its further important to keep the weight as low as possible, that's why we chosen Carbon for the plates and PA for the fasteners. Sturdy and lightweight for the best performance!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Precision Carbon Wing Mount plates are mounted one from the inside in the wing mount and one on top of the wing. As they have the same shape and hole pattern as the aluminum drill jig, they match up perfectly and further reinforce the mounting on the inside. The large footprint of this plates will help on the top side to keep the wing deformation as minor as possible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditionally, this set offer the possibility to drill holes in a specific distance to each other in order to change the wing position and affect the handling. The distance between each hole in the drill jig and the Carbon Wing Mount Plates is 2,5mm. This allows you to adjust the wing position in 2,5mm steps inside the same bodyshell. The total adjustment range of 12,5mm. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e The set is suitable for following Bodyshells: \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing ZooZilla \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing PreoPard \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing DogsBollox \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing HellCat \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing BayBee \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing Wolverine\u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing ZooDiac\u003cbr data-mce-fragment=\"1\"\u003e - Xtreme Twister \u003cbr data-mce-fragment=\"1\"\u003e - Xtreme Twister Speciale\u003cbr data-mce-fragment=\"1\"\u003e - Mon-Tech YSOT\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMAX-05-002 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x Maxclusive Aluminum drill jig\u003cbr data-mce-fragment=\"1\"\u003e 1x Ti-coated 3,0mm drill \u003cbr data-mce-fragment=\"1\"\u003e 8x Precision Carbon Wing Mount plate\u003cbr data-mce-fragment=\"1\"\u003e 4x M3x8 PA screw\u003cbr data-mce-fragment=\"1\"\u003e 8x M3 PA nut\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":33179225227367,"sku":"MAX-05-002","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot_2021-02-10MXLR-MAX-05-002-PrecisionWingMountSet_2_6bd8c7e0-73d6-4b93-8bc5-de2fff522015.png?v=1645722666"},{"product_id":"mxlr-precision-carbon-wing-mount-plates-8pcs","title":"MXLR Precision Carbon Wing Mount Plates.  (8pcs)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe wing position greatly affects the handling of your car. It's a powerful setup option to adjust your car to certain grip conditions and track layouts. Mounting the wing correctly and especially straight isn't as easy, but very important!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our CNC cutted Precision Carbon Wing Mount plates are sturdy and lightweight to keep the CG of your bodyshell as low as possible. The plates are mounted one from the inside in the wing mount and one on top of the wing. \u003cbr data-mce-fragment=\"1\"\u003e We recommend using our Precision Wing Mount set, as the Carbon plates have the same shape and hole pattern as the aluminum drill jig and to match up perfectly. The large footprint of this plates will help on the top side to keep the wing deformation as minor as possible.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditionally, this set offer the possibility to drill holes in a specific distance to each other in order to change the wing position and affect the handling. The distance between each hole in the drill jig and the Carbon Wing Mount Plates is 2,5mm. This allows you to adjust the wing position in 2,5mm steps inside the same bodyshell. The total adjustment range of 12,5mm. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e The Precision Carbon Wing Mount Plates are suitable for following Bodyshells: \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing ZooZilla \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing PreoPard \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing DogsBollox \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing HellCat \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing BayBee \u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing Wolverine\u003cbr data-mce-fragment=\"1\"\u003e - ZooRacing ZooDiac\u003cbr data-mce-fragment=\"1\"\u003e - Xtreme Twister \u003cbr data-mce-fragment=\"1\"\u003e - Xtreme Twister Speciale\u003cbr data-mce-fragment=\"1\"\u003e - Mon-Tech YSOT\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize (WxLxT): 10x22x0,5mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMAX-05-003 contains: \u003cbr data-mce-fragment=\"1\"\u003e 8x Precision Carbon Wing Mount plate\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":33179228668007,"sku":"MAX-05-003","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot_2021-02-10MXLR-MAX-05-003-PrecisionCarbonWingMountPlates_8pcs_1_9b2a63a3-0073-4a7a-a06c-90753e4db631.png?v=1645722657"},{"product_id":"mxlr-side-bite-f1-tire-additive","title":"MXLR Side Bite F1 Tire additive","description":"\u003cp data-mce-fragment=\"1\"\u003eThe tires are the ONLY connection between your car and the racetrack. Condition and preparation of the surface can be the difference between victory or defeat. With our SideBite Tire Additives your tire game will always be on point! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our Maxclusive SideBite F-1 Foam Tire Additive is odorless and non-toxic to comply with worldwide racing associations rules. Ideal for all track conditions, no matter if carpet, asphalt or concrete.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The solid metal can with plastic top cap allow an easy access with a brush (brush not included).\u003cbr data-mce-fragment=\"1\"\u003e Developed, produced and filled in Germany! \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Filling qty.: 100ml\u003cbr data-mce-fragment=\"1\"\u003e Filling tolerance: +\/- 5ml\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e MAX-08-002 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x SideBite F-1 Foam Tire Additive (100ml)\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":33179231125607,"sku":"MAX-08-002","price":12.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot_2021-02-10MXLR-MAX-08-002-SIDEBITEF-1-FoamTireAdditive_100ml_369fba3b-48fd-4199-a592-b7e07a5a84bc.png?v=1645722687"},{"product_id":"mxlr-tungsten-balance-weight-10g","title":"MXLR Tungsten Balance Weight 10g","description":"The weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003cbr data-mce-fragment=\"1\"\u003e Space to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our MXLR Tungsten Balance Weight 10g. is the same size as the widely known 5g. tire balance weight. \u003cbr data-mce-fragment=\"1\"\u003e This shows the big difference in the density and the advantage by using our tungsten weights in your car. \u003cbr data-mce-fragment=\"1\"\u003e Double the weight at the same footprint is great opportunity to further optimize the balance and the car performance.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Round corners as well as polished top and lower surface underline the high quality of our Tungsten Weights.\u003cbr data-mce-fragment=\"1\"\u003e For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Size (WxLxT): 11x19x3mm\u003cbr data-mce-fragment=\"1\"\u003e Weight: 10g. \u003cbr data-mce-fragment=\"1\"\u003e Weight tolerance: 10-10.8g.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e MAX-03-002 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x Tungsten Balance Weight 10g.","brand":"MXLR","offers":[{"title":"Default Title","offer_id":39608197415015,"sku":"MAX-03-002","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/MAX-03-002_1-jpg_600x600_1a0877e0-2b75-4ef1-aeb6-9ee0448fcb81.jpg?v=1645722689"},{"product_id":"mxlr-carbon-winglet-10th-scale","title":"MXLR Carbon Winglet 10th scale","description":"\u003cp data-mce-fragment=\"1\"\u003eWinglets are an important tuning possibility for every TC bodyshell. As they stiff up the side of the thin polycarbonate wings, there will be less deformation under load which results in more stability and grip.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCutted by a CNC machine, our MXLR Carbon Winglet 40x20mm comply with the maximum winglet size for EFRA and IFMAR events. The round edges are not only a optically benefit, it's also an protection for yourself and the track marshals in case of an accident.\u003cbr data-mce-fragment=\"1\"\u003e The strong 3M adhesive on the winglet backside guarantee an easy and secured installation on your wing. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Size (LxWxT): 40x20x0,5mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMAX-05-001 contains: \u003cbr data-mce-fragment=\"1\"\u003e 4x Carbon Winglet 40x20mm\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":39608198037607,"sku":"MAX-05-001","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot2022-01-21at20-46-02MXLR-MAX-05-001-CarbonWinglet110TC-40x20mm_4pcs_fdec4b5b-0442-4f9c-91df-6917038b5710.png?v=1645722643"},{"product_id":"mxlr-caster-setup-system-correction-sticker","title":"MXLR Caster setup system correction sticker","description":"\u003cp\u003eWe noted there are a few 1\/10 TC setup systems out there which have a wrong caster scale engraved. You can see a comparison picture in the gallery below to identify if yours is correct or wrong. If the scale is too narrow, its a one of the not correct versions out there, and your caster setting isn't actually the number it shows! \u003c\/p\u003e\n\u003cp\u003eWith our MXLR Caster correction stickers you are able to fix your caster scales without the need to buy a whole new system! They are precisely printed and cutted for a perfect fitment to the setup system.\u003cbr\u003e \u003cbr\u003e The application is easy, as the zero deg line of the actual setup system engraving will be used as the alignment point! This small line cut out of the sticker will ensure to position the sticker correctly. Additionally, the outer shape of the sticker matches with the shape of the setup system in this area to further help with the positioning.\u003cbr\u003e \u003cbr\u003e  As an small extra, we added FL, FR and RL, RR marks on the stickers to increase the consistency of your setup procedure by using the same setups system part always in the same spot.\u003c\/p\u003e\n\u003cp\u003eThe sticker sheet is pre-cut and covered by high quality matte laminate to protect the print from UV-light and chemical cleaners. \u003c\/p\u003e\n\u003cp\u003eMAX-07-007 contains:\u003c\/p\u003e\n\u003cp\u003e1x Setup System Caster correction (for HUDY 1\/10 TC Alloy System)\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Hudy","offer_id":39608215765095,"sku":"MAX-07-007","price":8.0,"currency_code":"USD","in_stock":false},{"title":"Gforce\/SkyRC","offer_id":39608215797863,"sku":"MAX-07-008","price":8.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/MAX-07-007-small_600x600_15658244-1b55-401b-9986-fe8c896d8769.jpg?v=1645722645"},{"product_id":"mxlr-elastic-tire-glue-20g","title":"MXLR Elastic Tire Glue (20g)","description":"\u003cspan data-mce-fragment=\"1\"\u003eYou can't just use any CA glue for your tires. Glue isn't glue! There are big differences between formulas and the use of the wrong CA glue could lead to unnecessary trouble on and off the track.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur MXLR Elastic Tire Glue stays elastic and offers a phenomenal glue power! \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe best choice for gluing of your RC tires, as it doesn't stiff up the rubber-plastic combo as much as other glues.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eYour tire game will be a lot more consistent and smoother, resulting in better performance on the track.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAlso perfect for sidewall gluing of rubber AND foam tires! The tire itself keeps the ability to \"work\" as the sidewalls still can float\/move, whilst the glue stays flexible and doesn't get bridle. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe formula of the MXLR Elastic Tire Glue is specially made for rubber and rubber-plastic combinations.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComes in a soft type plastic bottle for easy and sensitive application. The sealing cap features a little nozzle to secure the tip from clogging. Developed, produced and filled in Germany!\u003c\/span\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":39688748728423,"sku":"MAX-10-001","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/Screenshot2022-04-10at09-17-09MXLR-MAX-10-001-ElasticTireGlue_20g_07dba95e-16a8-4c5a-881f-2ccc4a272151.png?v=1665583377"},{"product_id":"mxlr-alloy-servo-arm","title":"MXLR Alloy Servo Arm","description":"\u003cp data-mce-fragment=\"1\"\u003eThe servo arm plays an important role of the overall handling and feeling of your steering inputs. \u003cbr data-mce-fragment=\"1\"\u003e Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition demands! The 3mm range for the height adjustment of the ball stud is a huge setup option which you shouldn't miss to play with! A higher turning point generates more initial response, while a lower turning point calm down the steering and creates a more finer resolution. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e You are able to set any height between 16-19mm without the need to switch any plates or parts of the horn, which makes it a quick setup change option by sliding the ball stud up or down. Our slightly bulkier arm design adds some extra strength and reliability!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Another very important feature of good a servo arm is the \"play free fit\" with the servo spline. As different manufacturers using different tolerances for the production of their splines (even they are the same teeth numbers) it's rather impossible to create a perfect fit servo arm without the use of a clamping design! Clearly, we also chosen to make us of this clamping feature which guarantee a perfect play free fit to all servo splines. \u003cbr data-mce-fragment=\"1\"\u003e Also make sure to read the \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.maexler.com\/instructions\/\"\u003eINSTRUCTIONS\u003c\/a\u003e before the installation of the servo arm!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our Adjustable Alloy Servo Arm is machined from high quality black anodized aluminum with silver edges and laser engraved logo to underline our key philosophy. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Two versions for different Servo splines are available. \u003cbr data-mce-fragment=\"1\"\u003e 23T suitable for: Sanwa \/ KoPropo \/ Airtronics \/ Graupner \/ Spektrum\u003cbr data-mce-fragment=\"1\"\u003e 25T suitable for: Futaba \/ MKS \/ PowerHD \/ Savöx \/ SRT\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e MAX-09-001 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x Adjustable Alloy Servo Arm 23T\u003cbr data-mce-fragment=\"1\"\u003e 1x Alloy Servo Horn Dongle \u003cbr data-mce-fragment=\"1\"\u003e 1x SC2X8 screw\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e MAX-09-002 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x Adjustable Alloy Servo Arm 25T\u003cbr data-mce-fragment=\"1\"\u003e 1x Alloy Servo Horn Dongle \u003cbr data-mce-fragment=\"1\"\u003e 1x SC2X8 screw\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"23T","offer_id":39892248035431,"sku":"MAX-09-001","price":26.0,"currency_code":"USD","in_stock":true},{"title":"25T","offer_id":39892248068199,"sku":"MAX-09-002","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/MAX-09-00X-3_f101970f-c201-4ebe-a771-a06820c7c50b.jpg?v=1665583371"},{"product_id":"mxlr-body-stiffener-kit","title":"MXLR Body Stiffener Kit","description":"Super thin and lightweight body shells are a trend since long time, as they drastically improve the handling. But there is also a downside with this flimsy Polycarbonate shells --\u0026gt; They deform under high speed or windy conditions, and the risk of a so called \"Body Tuck\" during intense racing action is just huge!\u003cbr data-mce-fragment=\"1\"\u003e There were several attempts to fix the issue with 3D printed or thicker Polycarbonate stiffeners inside the bodyshell...\u003cbr data-mce-fragment=\"1\"\u003e But all of them are rather heavy and influence the handling in a bad way, which removed the advantage of the \"lightweight\" shell. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our MXLR CBRS - Carbon Body Reinforcement set is the best option to prevent your body shell from unwanted deformation and body tucks! The carbon rods with 1.0mm diameter are very sturdy and ultra light! \u003cbr data-mce-fragment=\"1\"\u003e They come in 100mm length to be as multi functional as possible! You easily can cut them to the needed length for your needs. Weight of one piece 100x1.0mm carbon rod = 0,1g\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Use the included B-7000 glue to fix\/install the rods on the inside of your body shell. With the metal tip you are able to dose it very gentle even in narrow areas! Just a few drops are needed per rod. We recommend to let the glue dry for 6-12h to be fully hardened. Work with this glue only in well ventilated areas and avoid inhaling the fumes.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Example applications:\u003cbr data-mce-fragment=\"1\"\u003e - stiff up the front lip of 1\/12 body shells to stop the dragging on the ground at high speed.\u003cbr data-mce-fragment=\"1\"\u003e - use as anti tuck in the rear of your body shell. Glue two pieces of the rod in the \"fender\/rear bumper\".\u003cbr data-mce-fragment=\"1\"\u003e In best way you create a \"triangle\" shape\" like shown in the pictures below.\u003cbr data-mce-fragment=\"1\"\u003e - use as stiffener for the hood of TC body shells. Glue one rod in longitudinal direction from the inside to the hood.\u003cbr data-mce-fragment=\"1\"\u003e - use as stiffener for the window\/roof area of TC shells. Glue one rod in longitudinal direction across the front windshield from the inside of the shell. \u003cbr data-mce-fragment=\"1\"\u003e - use as stiffener for the sidewall of body shells. Depending on the shape of the shell either in across or longitudinal\u003cbr data-mce-fragment=\"1\"\u003e direction. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e MAX-05-005 contains:\u003cbr data-mce-fragment=\"1\"\u003e 10x 100mm x 1.0mm Carbon Rod\u003cbr data-mce-fragment=\"1\"\u003e 1x B7000 Bodyshell \/ Multipurpose Glue 15ml","brand":"MXLR","offers":[{"title":"Default Title","offer_id":39892564115559,"sku":"MAX-05-005","price":11.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/products\/MAX-05-005-2_22060e7f-8908-49d6-8c04-2716dc672fe6.jpg?v=1665583375"},{"product_id":"mxlr-a800r-shockvac-case","title":"MXLR A800R ShockVac Case","description":"\u003cp data-mce-fragment=\"1\"\u003eOur MXLR A800R ShockVac is a specially designed case which holds the new designed Awesomatix dampers in upright position to suck the air out of the case\/silicone oil by using one of the known Air Removers. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e With the all new design of these dampers its very hard to put them into the case of a normal air remover. The solution is our super slim design ShockVac! Reliable and stable positioning to fit perfectly under the upper case of the Air Remover. The solid alloy case allows a deep and lasting vacuum which is key to get all the small air bubbles out of the complex A800R dampers.\u003cbr data-mce-fragment=\"1\"\u003e Additionally it's very handy in size which means it doesn't take as much space on your pit table while working and is easy to store it in your race bag.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e The ShockVac is machined from high quality black anodized aluminum with silver edges and laser engraved MX logo. Reliability, quality and style combined to the best possible product!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e MAX-02-003 contains:\u003cbr data-mce-fragment=\"1\"\u003e 1x MXLR Awesomatix A800R ShockVac\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40139222384743,"sku":"99-MAX-02-003","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-02-003-1.jpg?v=1762467521"},{"product_id":"mr33-shock-pump-and-cover-for-mxlr-shock-stand","title":"MR33 Shock Pump and Cover for MXLR Shock Stand","description":"\u003cdiv class=\"content--title\" data-mce-fragment=\"1\"\u003eMR33 Shock Pump + Cover for MXLR A800R Shock Stand\u003c\/div\u003e\n\u003cdiv class=\"product--description\" data-mce-fragment=\"1\" itemprop=\"description\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe MR33 shock pump including plastic cover and sealing ring.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis pump fits together with sealing ring and lid perfectly on the aluminum A800R ShockVac aluminum stand from MXLR (MAX-02-003).\u003cbr data-mce-fragment=\"1\"\u003eWho has already bought the great aluminum stand, can still buy the right pump for venting the damper!\u003c\/p\u003e\n\u003c\/div\u003e","brand":"MR33","offers":[{"title":"Without MXLR Stand","offer_id":40973530071143,"sku":"MR33-AWE-SP-MXLR-1","price":23.0,"currency_code":"USD","in_stock":true},{"title":"With MXLR Stand","offer_id":40973530103911,"sku":"MR33-AWE-SP-MXLR-2","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2023-09-06at19-53-34MR33ShockPumpCoverforMXLRA800RShockStand.png?v=1762467704"},{"product_id":"mxlr-front-body-support-for-a800r","title":"MXLR Front Body Support for A800R","description":"\u003cp data-mce-fragment=\"1\"\u003eWith the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Front Body Support for the Awesomatix A800R which:\u003cbr data-mce-fragment=\"1\"\u003e - prevents deflection of the bodyshell under higher speeds\u003cbr data-mce-fragment=\"1\"\u003e - reduces the risk of cracking the front wheel arches of the bodyshell\u003cbr data-mce-fragment=\"1\"\u003e The result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Our MXLR Front Body Support is made of PA12 Nylon which is very durable and offers excellent tensile, abrasion and impact resistance! In the design process we took special care about the A800R front bulkhead design and the importance of \"flex\" in this area. Our Front Body Support is designed to have the least flex influence possible! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Installation info’s: \u003cbr data-mce-fragment=\"1\"\u003e #1: Choose either the 6mm or 8mm M4 grub screw, depending on the height of your bodyshell.\u003cbr data-mce-fragment=\"1\"\u003e #2: Screw the M4 grub screw in the top hole of the Front Body Support. As there is no thread pre-cutted, you will need a bit more power for the first installation! The screw will cut the thread itself into the Nylon material. We recommend doing this before you install the Front Body Support into your car! \u003cbr data-mce-fragment=\"1\"\u003e #3: Remove the two screws which connect the bumper plate of your A800R to the bulkheads and install the Front Body Support there. We recommend to use SB3X8 or SB3X10 screws here (not included in MAX-09-013) instead of the kit 6mm long SB3x6 screws.\u003cbr data-mce-fragment=\"1\"\u003e #4: Set the Front Body Support to the correct height! The grub screw should touch the hood without additional free play when the bodyshell itself is resting on the front bodypost clips\/orings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMAX-09-013 contains:\u003cbr data-mce-fragment=\"1\"\u003e 1x Front Body Support for Awesomatix A800R\u003cbr data-mce-fragment=\"1\"\u003e 1x M4x6mm Grub Screw\u003cbr data-mce-fragment=\"1\"\u003e 1x M4x8mm Grub Screw\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40274245288039,"sku":"MAX-09-013","price":14.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2023-11-03at19-49-15MXLR-MAX-09-013-FrontBodySupportforAwesomatixA800R.png?v=1762467870"},{"product_id":"mxlr-a12-kingpin-extension-screw","title":"MXLR A12 Kingpin Extension Screw","description":"Special designed and machined Screw for the front KingPin of the Awesomatix A12. \u003cbr data-mce-fragment=\"1\"\u003e Main feature is the extension of the KingPin length by 0,5mm which allows a greater possibility to set front droop with certain tires\/rims.\u003cbr data-mce-fragment=\"1\"\u003e The flange on the lower site of the head is the exact same OD as ST1208 (Steel and Alloy versions!) and suitable to fit SH12S0.2 Spring Shim's as well. Our ultra flat head design clears easily with all current 1\/12 scale front rims on the market! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Machined at highest standards from 12.9 Steel to be strong and reliable for a long lifespan. \u003cbr data-mce-fragment=\"1\"\u003e Only 0,3g weight per screw! \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e MAX-09-014 contains:\u003cbr data-mce-fragment=\"1\"\u003e 2x KingPin Extension Screw for Awesomatix A12","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40274253906023,"sku":"MAX-09-014","price":16.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2023-11-03at19-56-58MXLR-MAX-09-014-KingpinExtensionScrewforAwesomatixA12_2pcs.png?v=1762467874"},{"product_id":"mxlr-race-headlight-sticker-sheet-3-designs-on-one-sheet","title":"MXLR Race Headlight sticker sheet (3 designs on one sheet)","description":"\u003cp data-mce-fragment=\"1\"\u003eMost of us aim for an aggressive and racy look of our bodyshells. Most important for this are the Headlights and grills!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Together with the help from one of the best graphic designer in the USA we created the RACE Headlight Sticker set for 1\/10 bodyshells. Overall there are three different grills as well as head- and tail-light pairs on the sheet.\u003cbr data-mce-fragment=\"1\"\u003e Not to forget our SEND IT! license plates as extra gimmick!\u003cbr data-mce-fragment=\"1\"\u003e They are universal fit for the most 1\/10 TC as well as for some FWD and GT bodyshells.\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Every sticker sheet is pre-cut and covered by high quality shiny laminate to protect the print from UV-light and chemical cleaners. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e MAX-07-006 contains: \u003cbr data-mce-fragment=\"1\"\u003e 1x RACE Headlight Sticker set 1\/10\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40354189344871,"sku":"MAX-07-006","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-07-006_1.jpg?v=1762468040"},{"product_id":"mxlr-tungsten-balance-weight-esc-20g","title":"MXLR - MAX-03-012 - Tungsten Balance Weight - 20g - ESC","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40440502157415,"sku":"MAX-03-012","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-012-1_7aad628f-0a6a-4e62-b6f9-e8167c42701f.jpg?v=1763566979"},{"product_id":"mxlr-flexbumper-for-a800r","title":"MXLR FlexBumper for A800R","description":"\u003cp data-mce-fragment=\"1\"\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr data-mce-fragment=\"1\"\u003e - absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr data-mce-fragment=\"1\"\u003e - more robust and sturdy\u003cbr data-mce-fragment=\"1\"\u003e - it always goes back to original shape and don't drag on the floor after a crash\u003cbr data-mce-fragment=\"1\"\u003e - improved style\/optics :-)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOur MXLR FlexBumper for the Awesomatix A800MMX \/ A800R matches the original footprint, but with a lower overall profile!\u003cbr data-mce-fragment=\"1\"\u003e It's a direct replacement for the kit foam. The lower overall profile helps to keep the weight in an acceptable range. \u003cbr data-mce-fragment=\"1\"\u003e There are two MX logos on the backside to proof the originality. \u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Also suitable for all A700 models, as well as A800, A800X, A800X Evo, A800MMCX, A800MMX, A800R!\u003cbr data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e Weight comparison:\u003cbr data-mce-fragment=\"1\"\u003e MXLR FlexBumper = ~12g.\u003cbr data-mce-fragment=\"1\"\u003e Original Kit Bumper = ~6g.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMAX-09-00 contains:\u003cbr data-mce-fragment=\"1\"\u003e 1x MXLR FlexBumper for Awesomatix A800MMX\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40440509890663,"sku":"MAX-09-005","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-005-2.jpg?v=1762468300"},{"product_id":"mxlr-awesomatix-a12-damper-check-adapter","title":"MXLR Awesomatix A12\/A12X Damper Check Adapter","description":"Data is important in any Racing class! Our MXLR Awesomatix A12 Damper Check Adapter will help you to check and compare the stiffness of your middle damper. \u003cbr data-mce-fragment=\"1\"\u003eIt helps to ensure both sides are same\/similar and gives the chance to compare the actual stiffness of dampers build with different oils. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Adapter is 3D printed and fits on \"Diff Checkers\" with 3mm output shafts like the SkyRC or Arrowmax checkers. \u003cbr data-mce-fragment=\"1\"\u003eJust slide the adapter on the shaft and secure it with the grub screw (not included) from the Diff Checker adapters.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWorks with all Damper Rotor versions!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMAX-02-005 contains:\u003cbr data-mce-fragment=\"1\"\u003e1x Awesomatix A12 Damper Check Adapter\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40486405898343,"sku":"MAX-02-005","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-03-17at09-20-11MXLR-MAX-02-005-AwesomatixA12DamperCheckAdapter.png?v=1762468425"},{"product_id":"mxlr-fan-holder-for-a12","title":"MXLR Fan Holder for A12","description":"This is the final version of the prototype Fan Holder which Max Mächler used to win the 2023 1\/12 SPEC World Champion Title! The use of a 30mm Fan, powered by 6,0V from the Receiver, was definitely not a disadvantage! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt's not easy to fit such a big and strong Fan into the A12 but using smaller than 30mm wasn't an option at all, as we don't like to sacrifice performance! At the worlds Max used a heavily modified Fan to clear with the bodyshell. After several more tests and versions we finally found a suitable way which doesn't require as much modification, if any at all! We moved the Fan more forward and mounted it way steeper on the holder. The key to still get a great air flow were the small side dams! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result by using our Fan Holder with a strong 30mm Fan at 6,0V is a much lower Motor temperature. \u003cbr data-mce-fragment=\"1\"\u003eDepending on the track layout and grip conditions, it reduces the temperature by 12-18 degree Celsius! \u003cbr data-mce-fragment=\"1\"\u003eThis leads to the option of using more timing at the motor and\/or longer rollout, which means more speed! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur MXLR Fan Holder is 3D printed with relatively durable material which is able to absorb impacts to a certain degree. So far, we didn't see any broken holders at all. But we say it again - in the end its 3D printed and not machined or molded, which means there are chances it can break!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt was our goal to design it as light and at the same time as strong as possible. Without Fan and screws it weighs only 2,6g. We recommend using M3x12mm Alloy screws (not included) for the installation of a 30mm Fan (not included).\u003cbr data-mce-fragment=\"1\"\u003eTIP: Don't over tighten the screws, it's just plastic ;-)\u003cbr data-mce-fragment=\"1\"\u003eThe full assembly of the Fan Holder is around ~12g. depending on the actual Fan used.\u003cbr data-mce-fragment=\"1\"\u003eFor the installation on the side wings of the car you will need longer M3x12mm screws (not included).\u003cbr data-mce-fragment=\"1\"\u003eDepending on your Battery type and used shims under the side wings of your A12, you may need some additional shims (not included) for height adjustment of the Fan Holder. When using the MXLR Fan Holder you eventually don't use the OR230 Battery O-Ring, as the Fan Holder itself secures the Battery.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDepending on the mounting position and the height setup of the bodyshell, the Fan should clear and don't touch the Polycarbonat. In our tests with the currently most used LMP shells like AMR, Ponente and M20 we performed only for the M20 small modifications on the Fan by sanding the top edges. With GT style bodyshells there should be no issues at all. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMAX-09-019 contains:\u003cbr data-mce-fragment=\"1\"\u003e1x Fan Holder for Awesomatix A12\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40486405931111,"sku":"MAX-09-019","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-03-17at09-23-57MXLR-MAX-09-019-FanHolderforAwesomatixA12.png?v=1762468431"},{"product_id":"mxlr-flex-bumper-for-a12-wc-edition","title":"MXLR Flex Bumper for A12 WC\/X Edition","description":"The WC Edition of our A12 FlexBumper is the final version of the test part that Max Mächler used in his IFMAR World Championship winning A12! With an increased width of 18mm and extended depth of 4mm we achieved a way better support for the bodyshells, which plays a key role when using the popular ultra-light versions.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eActually this new style bumper takes over the role for the front body height adjustment , as the bodyshell rests completely on the bumper itself! With the three included spacers (1.0mm \/ 1.5mm \/ 2.0mm) it's rather easy to get the height setting perfect. Just place them under the bumper, directly on the Carbon Bumper plate of the A12! \u003cbr data-mce-fragment=\"1\"\u003eAt our tests in Europe and in the United States we found that these three different thickness spacer are suitable to get the correct bodyshell height settings by either using a single piece or stacking them up. We imprinted the thickness at different spots on each spacer to have a quick and easy count for the overall thickness when looking from above! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr data-mce-fragment=\"1\"\u003eYou may ask what are the advantages over foam bumpers? We can answer that: \u003cbr data-mce-fragment=\"1\"\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr data-mce-fragment=\"1\"\u003e- more robust and sturdy \u003cbr data-mce-fragment=\"1\"\u003e- it always goes back to original shape and don't drag on the floor after a crash \u003cbr data-mce-fragment=\"1\"\u003e- improved style\/optics :-) \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWeight comparison: \u003cbr data-mce-fragment=\"1\"\u003eMXLR FlexBumper = ~5,0g.\u003cbr data-mce-fragment=\"1\"\u003eOriginal Kit Bumper = ~3,5g.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstallation \/ Mounting tip:\u003cbr data-mce-fragment=\"1\"\u003eWe recommend to remove the SH1.5mm alloy spacer between the C1205 Suspension plate and the C1204 Bumper plate. By this the Bumper plate will sit higher and is less prone for rubbing.\u003cbr data-mce-fragment=\"1\"\u003eUse the different height printed spacers to adjust the FlexBumper height and by this the front bodyshell height.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMAX-09-017 contains:\u003cbr data-mce-fragment=\"1\"\u003e1x MXLR FlexBumper for Awesomatix A12 WC Edition\u003cbr data-mce-fragment=\"1\"\u003e1x 1.0mm Spacer for A12 WC Edition FlexBumper\u003cbr data-mce-fragment=\"1\"\u003e1x 1.5mm Spacer for A12 WC Edition FlexBumper\u003cbr data-mce-fragment=\"1\"\u003e1x 2.0mm Spacer for A12 WC Edition FlexBumper","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40486406062183,"sku":"MAX-09-017","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-03-17at09-27-57MXLR-MAX-09-017-FlexBumperforAwesomatixA12WCEdition.png?v=1762468435"},{"product_id":"mxlr-fan-holder-for-a12x","title":"MXLR - MAX-09-020 - Fan holder for Awesomatix A12X","description":"\u003cdiv class=\"product--description\" itemprop=\"description\"\u003e\n\u003cp\u003eMax MXLR is behind Max Mächler - an internationally successful RC racer. \u003cbr\u003eHigh Quality and Max Exclusive Products - Engineered in Germany. \u003cbr\u003eEach product has been carefully selected and developed. \u003cbr\u003eNo blunt relabeling - but quality as Max uses it everyday life on the race tracks of this world!\u003c\/p\u003e\n\u003cp\u003eThis is the updated version of the prototype that Max Mächler used in his World Championship victory 2023 - adapted to the new requirements of the new Awesomatix A12X.\u003cbr\u003eThe use of a 30mm fan - fed with 6V from the receiver - was definitely no downside!\u003cbr\u003e\u003cbr\u003eIt is not easy to integrate such a large and strong fan in the A12 - but smaller fans than 30mm were no option because no performance should be lost. At the World Championships himself, Max used a very significantly modified fan to get it under the body. After several tests and other versions, a solution was found that was hardly any modification. The fan was further set forward and attached steeper to the holder. The key to success to get the air flow where it is supposed to go are the small side covers.\u003c\/p\u003e\n\u003cp\u003eThe result of using this holder together with a 30mm fan at 6.0V voltage is a significantly reduced motor temperature.\u003cbr\u003eDepending on the track layout and the handle conditions, this construction reduces the temperature by 12-18°C.\u003c\/p\u003e\n\u003cp\u003eThe MXLR fan holder is 3D printed - made of a rather strongly resilient material which is able to absorb impacts up to a certain point.\u003cbr\u003eIn the tests, there were no defects in departures. In the end, however, there is a 3D printed part with the corresponding sensitivity - a risk of breaking on departure remains.\u003c\/p\u003e\n\u003cp\u003eThe goal was to coordinate the holder as lightly and at the same time resilient as possible. Without fans and screws, the part weighs only 2.6g. The use of M3x12mm aluminum screws is recommended (not included, but available at RCK) - in conjunction with a 30mm fan (also not included).\u003cbr\u003eTIP: Does not overturn the screws. It's just plastic!\u003cbr\u003eThe total weight is fully assembled at approx. 12.5g - depending on the fan used.\u003cbr\u003eLonger screws (M3x12mm, not included) are required for mounting on the lateral carbon plates.\u003cbr\u003eDepending on the rechargeable battery used and the shims below the plates, additional shims may be required (not included) to set the height of the fan holder. \u003cbr\u003eThe O-ring OR230 may not be needed to fix the battery because the fan holder itself holds the battery in place.\u003cbr\u003e\u003cbr\u003eDepending on the mounting position and the height of the body used, the fan should be able to run freely and should not touch the polycarbonate.\u003cbr\u003eIn tests with the most used car bodies (AMR, Ponente, M20), it was only necessary for the M20 to easily grind the corners of the fan away to get space. \u003cbr\u003eWith GT bodies there should be no space problems.\u003c\/p\u003e\n\u003cp\u003eMAX-09-020 contains: \u003cbr\u003e1x fan holder for Awesomatix A12X\u003c\/p\u003e\n\u003cp\u003eNote:\u003cbr\u003ePlease do not forget that this product is a product of a 3D printer. One can therefore see layers and lines of the material.\u003cbr\u003eMXLR strives for the best possible quality and therefore uses 3D printers which are also able to deliver them - however, a 3D printed part will always be different from a milled or injection part in the surface finish.\u003c\/p\u003e\n\u003cp\u003eNote: \u003cbr\u003eAdditional parts or cars can be shown on the figures of MXLR that are not included in the scope of delivery and should only represent the application with practical examples. These parts are not included in the delivery of the article. \u003cbr\u003eBefore using MXLR products, it is very important to read the general safety instructions. These are located on this page - as do the product instructions - as well as the product \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003einstructions:\u003c\/a\u003e \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40945349296231,"sku":"MAX-09-020","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-08-06at14-25-00MXLR-MAX-09-020-FanholderforAwesomatixA12XRC-KleinKramStefanKlein.png?v=1762469420"},{"product_id":"mxlr-max-09-021-carbon-electronics-plate-for-awesomatix-a12x-a12wc","title":"MXLR - MAX-09-021 - Carbon Electronics Plate for Awesomatix A12X \/ A12WC","description":"\u003cdiv class=\"product--description\" itemprop=\"description\"\u003e\n\u003cp\u003eMax MXLR is behind Max Mächler - an internationally successful RC racer. \u003cbr\u003eHigh Quality and Max Exclusive Products - Engineered in Germany. \u003cbr\u003eEach product has been carefully selected and developed. \u003cbr\u003eNo blunt relabeling - but quality as Max uses it everyday life on the race tracks of this world!\u003c\/p\u003e\n\u003cp\u003eThe MXLR Carbon Electronics Plate is made of 1.0mm thick carbon.\u003c\/p\u003e\n\u003cp\u003eThis is a basically simple part, which, however, brings many advantages:\u003cbr\u003e- it expands the small space that the A12X \/ A12WC offers for the installation of electronics\u003cbr\u003e- it allows super fast exchange of complete electronics by fastening with only two screws\u003cbr\u003e- the small notch on the front helps to center the servo\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMAX-09-021 contains:\u003cbr\u003e1x Carbon electronic plate\u003cbr\u003e2x M2x3mm screw\u003c\/p\u003e\n\u003cp\u003eNote: \u003cbr\u003eAdditional parts or cars can be shown on the figures of MXLR that are not included in the scope of delivery and should only represent the application with practical examples. These parts are not included in the delivery of the article. \u003cbr\u003eBefore using MXLR products, it is very important to read the general safety instructions. These are located on this page - as do the product instructions - as well as the product \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003einstructions:\u003c\/a\u003e \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":40945356734567,"sku":"MAX-09-021","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-08-06at14-26-54MXLR-MAX-09-021-CarbonelectronicplateforAwesomatixA12X_A12WCRC-KleinKramStefanKlein.png?v=1762469424"},{"product_id":"mxlr-wheel-sticker-sheets-12pcs","title":"MXLR Wheel Sticker Sheets (12pcs)","description":"\u003cp\u003eSick of the odd-looking white dish wheels which ruin the look of your outstanding RC car? \u003cbr\u003eNo worries, we got you covered!\u003c\/p\u003e\n\u003cp\u003eOur RACE Wheel Sticker sheet is designed, printed and pre-cut in Germany. \u003cbr\u003eThe golden six spoke design is an eye catcher no matter which bodyshell you will use.\u003cbr\u003ePerfect upgrade for GT and FWD class cars as well as all other TC classes.\u003c\/p\u003e\n\u003cp\u003eEvery sticker sheet is covered by high quality matte laminate to protect the print from UV-light and chemical cleaners. \u003cbr\u003eKeep in mind that stickers can be destroyed or scratched at crashes and barrier contacts, similar as 1:1 car wheels!\u003cbr\u003eThe stickers fit the most TC dish wheels like RCK, VOLANTE and SWEEP.\u003c\/p\u003e\n\u003cp\u003eSize (ODxID): 52,1x13,3mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e contains: \u003cbr\u003e1x RACE Wheel Sticker #4 (12pcs)\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Set 1 (12pcs)","offer_id":41009084235879,"sku":"MAX-07-001","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Set 2 (12pcs)","offer_id":41009084268647,"sku":"MAX-07-002","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Set 4 (12pcs)","offer_id":41009084301415,"sku":"MAX-07-004","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2024-09-16at12-03-34MXLR-MAX-07-001-RACEWheelSticker-FelgenDekorAufkleber-Design_1_12Stuck_RC-KleinKram.png?v=1762469654"},{"product_id":"mxlr-max-09-010-flexbumper-for-tamiya-tt-01-tt-02-small","title":"MXLR - MAX-09-010 - FlexBumper for Tamiya TT-01 \/ TT-02 - SMALL","description":"\u003cp\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics :-)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur MXLR FlexBumper for the Tamiya TT01 \u0026amp; TT02 matches the original footprint of the #51019 \"S\" bumper. It's a direct replacement for the kit foam. The MX logo on the front side of the bumper proof the originality.\u003c\/p\u003e\n\u003cp\u003eWeight: ~15g.\u003cbr\u003e\u003cbr\u003eMAX-09-010 contains:\u003cbr\u003e1x MXLR FlexBumper for Tamiya TT01 \u0026amp; TT02 (small)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41281735164007,"sku":"99-MAX-09-010","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-010-3.jpg?v=1762470782"},{"product_id":"mxlr-bearing-oil-v2","title":"MXLR Bearing Oil V2","description":"\u003cp\u003eFriction is the natural enemy of performance. That’s why high-quality ball bear-ings—and the right care—are essential to keeping your RC drivetrain running at peak efficiency.\u003c\/p\u003e\n\u003cp\u003eIntroducing the BALL BEARING OIL V2 – our newly refined formula devel-oped once again in close collaboration with a specialized German manufactur-er, exclusively for and with MXLR. This next-generation oil builds upon the proven performance of our original version and takes it a step further.\u003c\/p\u003e\n\u003cp\u003eWhat’s new?\u003cbr\u003e• Enhanced formula: Further optimized to reduce rolling resistance even more efficiently and ensure a freer drivetrain with reduced power loss.\u003cbr\u003e• Blue tint: The new light-blue coloring helps easily distinguish it from the original version and makes application more visible.\u003cbr\u003e• Same trusted quality: Ultra-thin consistency means just 1–2 drops are enough to penetrate sealed bearings and deliver long-lasting perfor-mance and protection.\u003cbr\u003e\u003cbr\u003eAs before, the 10ml bottle with precise metal tip ensures clean and effortless application for professional-grade maintenance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMAX-01-005 contains: \u003cbr\u003e1x MXLR Ball Bearing oil V2 (10ml) \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41343625101415,"sku":"99-MAX-01-005","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-01-005_2_small_16de4090-af17-4a6e-b560-8626d9c2f440.jpg?v=1762470913"},{"product_id":"mxlr-driveshaft-and-gear-lube-v2","title":"MXLR Driveshaft and Gear Lube V2","description":"\u003cp\u003eDriveshafts and gears in RC models are constantly exposed to high loads and rotational stress – making effective lubrication essential to minimize wear without restricting movement.\u003c\/p\u003e\n\u003cp\u003eWith DRIVESHAFT \u0026amp; GEARS OIL V2, we present an updated formula that builds on the success of the original version. Developed once again in close cooperation with a specialized German manufacturer, this oil is exclusively produced for MXLR and designed to deliver maximum performance in even the toughest conditions.\u003c\/p\u003e\n\u003cp\u003eThe new formula offers improved wear protection, stronger adhesion, and still maintains exceptional freedom of movement. Even under high RPM, the oil continues to lubricate critical components reliably. A subtle blue tint now makes it easier to identify and apply precisely.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWhat’s new?\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpdated formula:  Even higher durability and protection\u003c\/li\u003e\n\u003cli\u003eEnhanced tackiness: Ensures the oil stays in place, even under extreme load\u003c\/li\u003e\n\u003cli\u003eSmooth-running characteristics: For minimal drivetrain resistance\u003c\/li\u003e\n\u003cli\u003eBlue tint: The new light-blue coloring helps easily distinguish it from the original version and makes application more visible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAs before, the 10ml bottle with precise metal tip ensures clean and effortless application for professional-grade maintenance We recommend checking and servicing driveshafts daily during racing or testing – apply 1–2 drops per shaft for optimal results.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMAX-01-006 contains:\u003cbr\u003e1x DRIVESHAFT \u0026amp; GEARS OIL V2 (10ml)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41343628673127,"sku":"99-MAX-01-006","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-01-006_2_small_610e43f8-a999-47bb-a1cf-4cbcd02b8d4d.jpg?v=1762470916"},{"product_id":"flexbumper-for-awesomatix-a800fx","title":"FlexBumper for Awesomatix A800FX","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou may ask what are the advantages over foam bumpers? We can answer that: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- more robust and sturdy \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- it always goes back to original shape and don't drag on the floor after a crash \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- improved style\/optics :-) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOur MXLR FlexBumper for the Awesomatix A800FX (and A800FX Evo) offers the original shape! \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt's a direct replacement for the kit foam. Both bumper weights, ST230 \u0026amp; ST265 are suitable to use as well, just like the original bumper. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThere are two MX logos on the backside to proof the originality.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWeight comparison: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMXLR FlexBumper = ~20g.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOriginal Kit Bumper = ~10,5g.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMAX-09-004 contains:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x MXLR FlexBumper for Awesomatix A800FX\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41343637323879,"sku":"MAX-09-004","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-004_3_small_89d3ec3c-33d3-48ff-be59-5fd4977a7771.jpg?v=1762470920"},{"product_id":"mxlr-flexbumper-for-tamiya-trf421","title":"MXLR FLEXBUMPER FOR TAMIYA TRF421","description":"\u003cp\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics :-)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur MXLR FlexBumper for the TAMIYA TRF421 matches the original footprint, but with a lower overall profile! \u003cbr\u003eAlso the front body post adjustment of the TRF421 is fully in function with our design, the bumper can slide back and forth depending on the used body post position.\u003cbr\u003eIt's a direct replacement for the kit foam! The lower overall profile helps to keep the weight in an acceptable range.\u003cbr\u003eThere are two MX logos on the backside to proof the originality.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight information:\u003cbr\u003eMXLR FlexBumper = ~11g.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMAX-09-023 contains:\u003cbr\u003e1x MXLR FlexBumper for TAMIYA TRF421\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41343638372455,"sku":"MAX-09-023","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-023_1_small_2353e543-3736-4509-9496-7de8a28b8b97.jpg?v=1762470925"},{"product_id":"mxlr-rear-body-support-for-a800r","title":"MXLR Rear Body Support for A800R","description":"\u003cp\u003eWith the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Rear Body Support for the Awesomatix A800R which:\u003cbr\u003e- prevents deflection of the bodyshell under higher speeds\u003cbr\u003e- reduces the risk of cracking the rear wheel arches of the bodyshell\u003cbr\u003eThe result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce! \u003cbr\u003e\u003cbr\u003eOur MXLR Rear Body Support is made of PA12 Nylon which is very durable and offers excellent tensile, abrasion and impact resistance! In the design process we took special care about the A800R rear bulkhead design and the importance of \"flex\" in this area. Our Rear Body Support is designed to have the least flex influence possible! \u003cbr\u003e\u003cbr\u003eInstallation info’s: \u003cbr\u003e#1: Choose either the 6mm or 8mm M4 grub screw, depending on the height of your bodyshell.\u003cbr\u003e#2: Screw the M4 grub screw in the top hole of the Front Body Support. As there is no thread pre-cutted, you will need a bit more power for the first installation! The screw will cut the thread itself into the Nylon material. We recommend doing this before you install the Front Body Support into your car! \u003cbr\u003e#3: Remove the two screws which connect the bumper plate of your A800R to the bulkheads and install the Front Body Support there. We recommend to use SB3X8 or SB3X10 screws here (not included in MAX-09-013) instead of the kit 6mm long SB3x6 screws.\u003cbr\u003e#4: Set the Rear Body Support to the correct height! The grub screw should touch the hood without additional free play when the bodyshell itself is resting on the front bodypost clips\/orings.\u003c\/p\u003e\n\u003cp\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e\n\u003cp\u003eMAX-09-013 contains:\u003cbr\u003e1x Rear Body Support for Awesomatix A800R\u003cbr\u003e1x M4x6mm Grub Screw\u003cbr\u003e1x M4x8mm Grub Screw\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41462355099751,"sku":"MAX-09-026","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/Screenshot2023-11-03at19-49-15MXLR-MAX-09-013-FrontBodySupportforAwesomatixA800R.png?v=1762467870"},{"product_id":"mxlr-m-flexbumper-for-awesomatix-a800r-a800rr","title":"MXLR M-FlexBumper for Awesomatix A800R \/ A800RR","description":"\u003cp\u003eThe MXLR \u003cstrong\u003eM-FlexBumper\u003c\/strong\u003e is a weight optimized version of our hyper popular FlexBumper.\u003cbr\u003eOur goal was to offer a lighter version which remains stable and strong enough for best performance - and\u003cbr\u003ewith our new \"M-shape\" we managed it! \u003cbr\u003e\u003cbr\u003eWith ~8,8g weight the new M-FlexBumper version is more than 3g lighter than our std. FlexBumper version (which will remain active in our portfolio as well!), and only 3g. heavier than the kit foam bumper!\u003c\/p\u003e\n\u003cp\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics\u003c\/p\u003e\n\u003cp\u003eOur MXLR M-FlexBumper for the Awesomatix A800R\/RR \u0026amp; A800FXR matches the original footprint, but with a lower overall profile! It's a direct replacement for the kit foam. \u003cbr\u003eThere are two MX logos on the backside to proof the originality. \u003cbr\u003eAlso suitable for all A700 models, as well as A800, A800X, A800X Evo, A800MMCX, A800MMX!\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: The M-FlexBumper is optimized for high competition use where every gram counts. \u003cbr\u003eClearly - this version is less crash resistant in case of accidents than the std. FlexBumper! \u003cbr\u003ePlease store the bumper (as spare or installed in the car) on a flat ground, and avoid to store it squeezed or under load\/pressure! \u003c\/p\u003e\n\u003cp\u003eWeight comparison:\u003cbr\u003eMXLR FlexBumper = ~8,8g.\u003cbr\u003eOriginal Kit Bumper = ~6g.\u003c\/p\u003e\n\u003cp\u003eMAX-09-025 contains:\u003cbr\u003e1x M-FlexBumper for Awesomatix A800 series (MMX\/R\/RR\/FXR etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41462356705383,"sku":"MAX-09-025","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-025-4.jpg?v=1762470990"},{"product_id":"mxlr-flexbumper-for-mugen-mtc3","title":"MXLR FlexBumper for Mugen MTC3.","description":"\u003cp\u003ehe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics :-)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur MXLR FlexBumper for the Mugen MTC3 matches the original footprint, but with a lower overall profile!\u003cbr\u003eIt's a direct replacement for the kit foam! The lower overall profile helps to keep the weight in an acceptable range.\u003cbr\u003eThere are two MX logos on the backside to proof the originality.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight information:\u003cbr\u003eMXLR FlexBumper = ~9,5g.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMAX-09-023 contains:\u003cbr\u003e1x MXLR FlexBumper for Mugen MTC3\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41625062047847,"sku":"MAX-09-027","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-027_1_small_6b757810-b336-4f72-8204-426cbff0ba01.jpg?v=1762471517"},{"product_id":"mxlr-max-02-006-tirefinisher-sanding-paddle","title":"MXLR - MAX-02-006 - TireFinisher - Sanding Paddle","description":"\u003cp\u003eEver wondered how to get your foam tires perfectly prepared to work from the first lap?\u003cbr\u003eThe answer is the \u003cstrong\u003eMXLR TireFinisher Sanding Paddle\u003c\/strong\u003e, which is handily equipped with four different diamond grid areas!\u003cbr\u003eOne tool to finish off a perfect tire after you cut\/trued it to the desired size.\u003cbr\u003e\u003cbr\u003eBut it isn't only handy for foam tires - also perfect for rubber tires to remove or adjust sidewall glue! \u003cbr\u003eA must have for every serious driver that wants to get the best out of his tires. \u003cbr\u003e\u003cbr\u003eThe four different grids: \u003cbr\u003e#120 - perfect to trim\/sand down the sides of your foam tires\/rim.\u003cbr\u003eAlso perfect to remove CA glue from the sidewalls of rubber tires.\u003cbr\u003e#240 - best choice for rounding of the edges on foam tires.\u003cbr\u003e#320 - optimal grid to smoothen the top surface of any type foam tires.\u003cbr\u003e#1000 - FINISHER, the final step to make your foam tire game perfect from the first corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTENTION:\u003c\/strong\u003e\u003cbr\u003eTo avoid any misunderstandings: This comes with ONE tool that offers a total of FOUR different grits on TWO sides.\u003cbr\u003eWith a single tool, you can cover all four areas without needing four different tools.\u003cbr\u003eThe images show multiple tools at once to show all four grits in one image.\u003cbr\u003eThe wheels shown are also not included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864684666983,"sku":"99-MAX-02-006","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-02-006-6.jpg?v=1762536383"},{"product_id":"mxlr-max-03-006-tungsten-balance-weight-5g","title":"MXLR - MAX-03-006 - Tungsten Balance Weight - 5g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864685224039,"sku":"99-MAX-03-006","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-006-1.jpg?v=1762536525"},{"product_id":"mxlr-max-03-008-tungsten-balance-weight-10g","title":"MXLR - MAX-03-008 - Tungsten Balance Weight - 10g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864685322343,"sku":"99-MAX-03-008","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-008-2.jpg?v=1762536621"},{"product_id":"mxlr-max-03-009-tungsten-balance-weight-12g","title":"MXLR - MAX-03-009 - Tungsten Balance Weight - 12g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864686796903,"sku":"99-MAX-03-009","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-009-1.jpg?v=1762536771"},{"product_id":"mxlr-max-03-010-tungsten-balance-weight-15g-brick","title":"MXLR - MAX-03-010 - Tungsten Balance Weight - 15g - BRICK","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864687911015,"sku":"99-MAX-03-010","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-010-2.jpg?v=1762536804"},{"product_id":"mxlr-max-03-011-tungsten-balance-weight-15g-esc","title":"MXLR - MAX-03-011 - Tungsten Balance Weight - 15g - ESC -","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864688205927,"sku":"99-MAX-03-011","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-03-011-1.jpg?v=1762536929"},{"product_id":"mxlr-max-09-018-spacer-set-for-a12-wc-edition-flexbumper-set-of-3","title":"MXLR - MAX-09-018 - Spacer Set for A12 WC Edition FlexBumper (set of 3)","description":"\u003cp\u003eSpacers spare part set for the A12 WC Edition FlexBumper.\u003c\/p\u003e\n\u003cp\u003eMAX-09-018 contains:\u003cbr\u003e1x 1.0mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e1x 1.5mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e1x 2.0mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":41864694530151,"sku":"99-MAX-09-018","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-09-018-4.jpg?v=1762537385"},{"product_id":"mxlr-max-03-006-tungsten-balance-weight-5g-copy","title":"MXLR - MAX-03-007 - Tungsten Cube Balance Weight - 5g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":42109800906855,"sku":"MAX-03-007","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/picture-1600.jpg?v=1768757697"},{"product_id":"mxlr-max-02-007-beauty-brush","title":"MXLR - MAX-02-007 - Beauty Brush","description":"\u003cp\u003eYes, it’s a beauty brush. No, we’re not kidding.\u003c\/p\u003e\n\u003cp\u003eLet’s address the obvious:\u003cbr\u003eYes, this brush comes from the beauty department.\u003cbr\u003eYes, it was originally designed for flawless makeup application.\u003cbr\u003eAnd YES — it turns out to be absolutely perfect for cleaning RC cars.\u003c\/p\u003e\n\u003cp\u003eLaugh now. Then try it.\u003cbr\u003eWARNING: Keep out of reach of girlfriends. They may steal it :-) \u003cbr\u003e\u003cbr\u003eWhy the \u003cstrong\u003eMXLR RC Beauty Brush\u003c\/strong\u003e? Because it works better than anything else! \u003cbr\u003eThe ultra-soft, ultra-dense bristles are designed to be incredibly fine and extremely gentle.\u003cbr\u003eAll this makes them ideal for:\u003cbr\u003e-removing fine dust from shocks, arms and chassis\u003cbr\u003e-cleaning tight spaces around electronics\u003cbr\u003e-detailing carbon parts and anodized components\u003cbr\u003e-keeping your car race-ready without scratching a thing\u003cbr\u003e\u003cbr\u003eThis isn’t about gimmicks. It’s about performance!\u003cbr\u003eProfessional RC Racing demands precision. And ironically, so does professional makeup.\u003cbr\u003e\u003cbr\u003eThe MXLR RC Beauty Brush features:\u003cbr\u003e- High-density, ultra-soft bristles\u003cbr\u003e- Perfect balance between firmness and softness\u003cbr\u003e- Anti-scratch detailing performance\u003cbr\u003e- Ergonomic handle for full control\u003cbr\u003e- Cap to safe the bristles when stored\/transported with other tools\u003cbr\u003e- MXLR logo print on top of the cap and on the shaft\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTHE MXLR RC Beauty Brush\u003c\/strong\u003e\u003cbr\u003eIt’s gentle on surfaces — but ruthless on dust.\u003cbr\u003eBecause clean cars are fast cars! And apparently… glamorous ones too!\u003cbr\u003e\u003cbr\u003eMAX-02-007 contains:\u003cbr\u003e1x MXLR RC Beauty Brush\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":42243441983591,"sku":"99-MAX-02-007","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-02-007-5.jpg?v=1773246555"},{"product_id":"mxlr-slow-mo-damping-grease-15g","title":"MXLR - SLOW-MO - Damping Grease - (15g)","description":"\u003cp\u003eOur MXLR SLOW-MO Damping Grease is the first choice when it comes to KingPin front ends of 1\/12 PanCars, Pro10 or F1. No Fade. No Separation. No Guesswork! Super smooth and ultra stable viscosity! \u003c\/p\u003e\n\u003cp\u003eThis isn't \"just another grease\" - it went a lot of testing and development into the formula to reach the best consistency, correct stickiness and range between the different available hardness levels. \u003cbr\u003eWe focused a lot to find the best micro-adhesion that the grease stays in place to provide consistent damping over the full travel range. Simple oils and greases mostly can't provide this.\u003cbr\u003e\u003cbr\u003eOur range from 10k to 30k in 5k separations will cover all track conditions you may face! \u003cbr\u003eOur recommendation:\u003cbr\u003e- thicker grease to slow down steering response and overall easier handling.\u003cbr\u003e- thinner grease for a more aggressive handling with more response. \u003cbr\u003e\u003cbr\u003eSLOW-MO Damping Grease comes in a clear 15g. container which keeps the grease clean and in perfect condition during storage in your RC bags. \u003c\/p\u003e\n\u003cp\u003eMXLR SLOW-MO Damping Grease:\u003cbr\u003eMAX-01-007 MXLR SLOW-MO Damping Grease 10K - Green\u003cbr\u003eMAX-01-008 MXLR SLOW-MO Damping Grease 15K - Orange\u003cbr\u003eMAX-01-009 MXLR SLOW-MO Damping Grease 20K - Blue\u003cbr\u003eMAX-01-010 MXLR SLOW-MO Damping Grease 25K - Pink\u003cbr\u003eMAX-01-011 MXLR SLOW-MO Damping Grease 30K - Red\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"10K Green","offer_id":42243451158631,"sku":"99-MAX-01-007","price":19.0,"currency_code":"USD","in_stock":true},{"title":"15K Orange","offer_id":42243451191399,"sku":"99-MAX-01-008","price":19.0,"currency_code":"USD","in_stock":true},{"title":"20K Blue","offer_id":42243451224167,"sku":"99-MAX-01-009","price":19.0,"currency_code":"USD","in_stock":true},{"title":"25K Pink","offer_id":42243451256935,"sku":"99-MAX-01-010","price":19.0,"currency_code":"USD","in_stock":true},{"title":"30K Red","offer_id":42243451289703,"sku":"99-MAX-01-011","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-01-007.jpg?v=1773246763"},{"product_id":"mxlr-max-13-001-fan-booster","title":"MXLR - MAX-13-001 - FAN BOOSTER","description":"\u003cp\u003eOur MXLR FAN BOOSTER is designed to level up your cooling game! \u003cbr\u003eSimply connect the FAN BOOSTER via the JR Servo Plug with your receiver, plug your Fan into the FAN BOOSTER and experience the difference!\u003cbr\u003e\u003cbr\u003eThis small device transforms the 6V of your receiver to 8V output, which will increase the speed of your fan and by this the cooling ability! This leads to less fading, more consistency and by this more speed over run time. Simple huh ? \u003cbr\u003e\u003cbr\u003eThe MXLR FAN BOOSTER comes in a lightweight alloy case, with one JR Servo Plug to connect to the receiver and one female JST connector to plug in the fan. Clearly all wires and plugs are black! \u003cbr\u003eThe unit weights 4,5g. and has the following case dimensions: \u003cbr\u003e24,20mm long \/ 13,20mm wide \/ 6,2mm high\u003cbr\u003eWire legth: 29,50mm (to receiver) \/ 41,50mm (fan connector)\u003cbr\u003eMax Voltage input: 8.0V \u003cbr\u003eMin Voltage input: 4.0V\u003cbr\u003e\u003cbr\u003eIMPORTANT NOTICE: \u003cbr\u003e- make sure your used cooling fan can work\/operate at 8,0V !!!\u003cbr\u003e- always check the polarity before plugging in the booster \/ fan !!!\u003cbr\u003e- we recommend to use this FAN BOOSTER only with ESC's that provide stable BEC voltage !!! \u003c\/p\u003e\n\u003cp\u003eMAX-13-001 contains:\u003cbr\u003e1x MXLR FAN BOOSTER\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":42243462463591,"sku":"99-MAX-13-001","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-13-001-1.jpg?v=1773247287"},{"product_id":"max-02-008-mxlr-rimfinisher-1-12-sanding-tool","title":"MAX-02-008 MXLR RimFinisher 1\/12 Sanding Tool","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e👉\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003eMAX-02-008 MXLR RimFinisher 1\/12 Sanding Tool\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eThe MXLR RimFinisher is a simple tool to remove mold seams on 1\/12 rims to guarantee a flat surface for perfect mounting on the axle hubs. Two to three turns with very slight force and all the unwanted seams are gone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eWith an outer diameter of ~35,50mm the RimFinisher fits basically all modern times 1\/12 rear rims, and most of current 1\/12 front rims. There are very few exceptions for the front, when the wheel OD is too small\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eLightweight 3D printed sanding block with MXLR World Logo on top.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eEach set comes with 5 sanding disc's which feature double sided tape on the backside for easy and simple installation on the sanding block.\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":42310268846183,"sku":"99-MAX-02-008","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-02-008_1.jpg?v=1775147693"},{"product_id":"max-05-007-bodyshell-mounting-hole-reinforcement-12pcs","title":"MAX-05-007 Bodyshell Mounting Hole Reinforcement (12pcs)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e👉\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003eMAX-05-007 Bodyshell Mounting Hole Reinforcement (12pcs)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eEveryone knows the feeling of crashing with a new lightweight bodyshell and the mounting whole rips.... This can be easily prevented with some MXLR Bodyshell Mounting Hole Reinforcement parts!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eNot only useful to increase the reliability of your bodyshells --\u0026gt; also great for re-align the mounting holes of your bodyshell in case of accidentally mispositioning! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eMade of clear 0,5mm thick PC material featuring thin double-sided tape on the backside for easy and simple installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"MXLR","offers":[{"title":"Default Title","offer_id":42310270287975,"sku":"99-MAX-05-007","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-05-007_3.jpg?v=1775147835"},{"product_id":"mxlr-max-01-003-o-ring-grease-5g","title":"MXLR - MAX-01-003 - O-Ring Grease (5g)","description":"\u003cp\u003eO-Rings and seals are known to get either hard and brittle after some time or swell up and generate excessive friction when they are in contact with fluids (mostly silicone based oils). BUT there is a chance to keep the O-Rings \/ seals always in great shape! \u003c\/p\u003e\n\u003cp\u003eTogether with a Germany special manufacturer for grease and oil we developed the MXLR O-Ring Grease.\u003cbr\u003eIt consists of well chosen high quality ingredients in a special mixture to protect the O-Rings \/ seals against swelling or shrinking. Additionally, our grease further reduces the friction and adds extra smoothness for the perfect operation of dampers and gear diffs.\u003c\/p\u003e\n\u003cp\u003eEspecially silicone O-Rings, like they are used in most shocks, are highly prone for swelling when they get in contact with silicone oil and need to be replaced regularly. By using the MXLR O-Ring Grease you will extend the lifetime drastically and further increase the performance of your vehicle, as the damping will stay more consistent for a longer time frame! \u003cbr\u003e\u003cbr\u003eJust dip the seals into the grease and make sure all surfaces are covered before the installation --\u0026gt;  that's how easy it is to level up the performance.\u003c\/p\u003e\n\u003cp\u003eIt comes in a clear 5g. container which keeps the grease clean and in perfect condition during storage in your RC bags. \u003cbr\u003eAdditional tip: Once the grease is empty, the container is great to store small parts like screw, clips or pins :-) \u003c\/p\u003e\n\u003cp\u003eMAX-01-003 contains:\u003cbr\u003e1x MXLR O-Ring Grease (5g)\u003c\/p\u003e","brand":"mxld","offers":[{"title":"Default Title","offer_id":43056728637543,"sku":"MAX-01-003","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2212\/5301\/files\/MAX-01-003-2.jpg?v=1777067603"}],"url":"https:\/\/teameamotorsports.com\/collections\/mxlr.oembed","provider":"Team EAM, Inc","version":"1.0","type":"link"}