7075.it

Compact, beautiful and powerful, this tool will remove the air from shock absorbers and diffs quickly and easily. The small size of the device will...

Allows you to add 8.5 gr using the existing cut out of the Servo Mount and secure it with a screw that also works as lipo stop.

These brass components add about 9g of weight on the front and center of the car making it easier to drive.

These brass components add about 5 grams of weight on the cars bumper making it easier to drive in high bite conditions.

New optional brass battery stop. Thanks to this it will be possible to move the battery of your T4.  This will space the battery out 2.5mm from the...

The  Motor Mount plate which is normally aluminum is now offered in brass. This piece allows you to put weight (6.5g) in the most central position ...

Replaces the carbon bar allowing to increase the weight in the car in the most central part of the frame and stiffens the connection between Mount ...

We have adapted the design of our Center Weights to the look of the T4 2019. 1 screw and PIN will allow the chassis to flex. Also compatible with ...

Thanks to the new design we are able to fix the weight to the chassis in several ways: FLEX 1 screw and PIN will allow the chassis to flex; STIFF...

It is located in the existing space of the chassis on the side of lipo and it is attached with double-sided tape. With the new generation of lighte...

This product is included in the FF75-XT09GH kit.  Replace the stock aluminum pins in the lipo holders with brass ones for more weight on the batter...

This product has been designed not only to secure the batteries without using the BATTERY TAPE under the chassis but also to position the weight wh...

This product is included in the FF75-XT09GH kit.  Aluminum holders for the lipo.  Replaces the stock graphite pieces for more weight on the battery...

The latest ESC models are lighter than the previous ones,so we have found a solution that allows us to add about 20 gram directly to the ESC withou...

This tool allows a quick and precise replacement of the rotor of your brushless motor. External Diameter 14.55 mm

This optional made from Aluminum 7075 T6 and extremely precise in the coupling tolerances,ensures a perfect alignment of the differential b...

Steering Post + Steering Arms Alu 7075 T6 INFINITY IF 14

  New brass optional! It is located  in the existing space of the chassis on the side of lipo and it is at...

New brass optional ! This component allows you to weigh in the center of the Chassis.  25gr.

This brass component was designed to add about 29 grams on the electronic components side,allowing you to use lighter ESCs while maintainin...

This Aluminum 7075 T6 chassis has been designed to make several improvements to the model:Lower center of gravity, greater stability;Greate...

Replaces the carbon bar allowing to increase the weight of the model in the most central part of the frame and stiffens the chassis.  12 gr...

These chassis are available with the weights or as a chassis only. These chassis are designed to accommodate weights that sit flush in the bot...

Air Killer Plus Even smaller and more versatile than the previous versions the brand new Air Killer Plus, thanks to its tech specs, is destine...