XT2

The springs have been specifically designed to complement the big bore shocks. Set of 2. The spring rate of the linear springs is constant during t...

Avid  Titanium Ball Studs are specially designed for the Xray line of vehicles such as the T4 and XB4 to minimize weight without sacrificing streng...

Yokomo Yatabe Arena Big Bore Rear Shock Springs were developed for extremely high traction surfaces, such as turf or carpet. These ...

Molded 36T or 38T gear made from specially-formulated graphite composite material gives the perfect balance between reliability and performance.

Hardened, high-strength front shock shafts are polished for super-smooth operation. Set of 2.

This is an optional XRAY 1.0mm XB2 Anti-Roll Bar Set, including a 1.0mm bar and the necessary mounting hardware. 

The XRAY 21mm Shock Ball Joints are 4mm longer than the standard ball joints, providing more down travel. Compatible with the XB4 and XB2 models, t...

This is a pack of four Yokomo 4mm Thin Aluminum Serrated Flanged Nuts. Perfect for 1/10 wheel nuts, these Yokomo nuts are only 3.5mm thick and feat...

Our lightweight titanium wheel nuts are super durable and have a very tough anodising to prevent against wear. Their titanium construction will out...

XRAY 2 Hole Piston, 1.6mm, Flat XRAY 2 Hole Piston, 1.7mm, Flat XRAY 3x1.4 Piston, Flat CNC Machined Delrin (TM), perfectly round Tight fit to sho...

This is a set of two XRAY 0.75mm Offset Aluminum Wheel Shims, and are intended for use with the XRAY T2 family of vehicles.

This is a set of replacement servo arms for the Xray XB8 line of buggies. This set of molded composite servo arms includes double-arm for throttle ...

Xray Replacement Drive Pins

This is a replacement XRAY 4.9mm Aluminum Ball End Set, and is intended for use with the XRAY T2 '09, and T3 vehicles. These ball ends are the same...

This is a pack of two replacement XRAY Long Steel Steering Bushings, and are intended for use with the XRAY XB4 1/10 scale 4WD buggy. These bushing...

This is an optional XRAY +2mm Brass Rear Lower Suspension Holder Set. This set include a rear-front and a rear-rear block. These optional brass l...

This is an optional XRAY Aluminum Shock Cap Set, and is intended for use with the XRAY XB4 1/10 scale 4WD buggy. These shock caps are made from alu...

XRAY XB2 Stainless Steel Battery Weight was developed to be placed beneath battery to add weight as low as possible. This helps to make the car eas...

XRAY XB2 Carpet Edition Composite Rear Roll Center Holder. This is the replacement rear roll center holder for the XB2 Carpet Edition 1/10 buggy