Products

BEL351HD Heavy Duty Belt 351mm Optional Awesomatix 351mm High-Performance Drive Belt for high power applications. Specially suited for Modified cla...

HRC Set HRC (High Roll Center) set is +2mm higher roll center measured from the lower face of AM1204 compared to ELRC.  HRC is recommended for ...

ST116 IFJ Cross

IFJ reduces the friction between the outdrive and the dog-bone. It increases the efficiency of transmission and decreases friction greatly. Due to ...

ST113 - IFJ Universal Bone Only (1)

IRJ - Inner Rear Joint set

ST114 - IRJ Universal Bone Only (1)

ST69X-00 Linear Spring Screw

P14-1-R Lower Bumper New A800R Part

AT248 Lower Bumper Post New optional parts for A800R AT248 reduces the local load on the area of the front bumper center mounting screw on the lowe...

OR1010V Lower Damper Valve O-Ring x 4 New A800R Part

T02 Multi Tool 5,5mm/6,5mm/7,0mm wrench which is made from high grade stainless steel with laser engraved logo. Highly recommended for the FBS (F...

P13-4 Open Ball End x 2 The parts are designed to replace the standard upper inner pivots for the camber and caster links of the A700 touring car t...

P23-R Outer Battery Holder x 2 New A800R Part

P01 - Ball Joint-1 x 4 P02 - Ball Joint-2 x 4 **Select which set in drop down menu**

P03 - Arm Ball Cap x 5

P05 - Sway Bar Joint x 4

P07 - Arm Clip x 10

P110 - Bearing Housing x 2 For A800X Series

P12X - Sway Bar Holder x 4

P138 38T Pulley P138LF 38T Low Friction Rear Pulley P138S-LF 38T Low Friction Front Spool Pulley

P16 - Lock Ring x 4 Quantity of P16 per bag changed as of 2017/A800X introduction

P45 - Sponge Piston OR P45L For use w/in the D2 / D2.1 Shocks

P63-R Damper Piston x4 P63-R Damper pistons for use in D2.2 Dampers (requires AT41-2 Damper Vanes). Special anti sticking rubber is used for this ...