Awesomatix

A12-SPR12S0.5 Side Spring C0.5 x 2

DT1202 Steering Washer x 2

ST1211 Spring Retainer x 2

ST1204-X Damper Case

ST1202-XS Damper Rotor x 2 Awesomatix A12X Damper Rotor - full steel 1-piece part instead of 2-piece pressed parts (replaces A12-ST1202-XA in the 2...

SH12S-0.2 Spring Shim x14 On the A12, shims used to adjust the height of the spindle and apply different amounts of pressure to the front spr...

SH12R0.5 Rear Axle Shim x4

SH12R2.0 Rear Axle Spacer 2.0mm x 2

P1215 Foam Bumper

OR915 9x1.5mm O-Ring Spool Spur ORing used with thin / TC-styled spur gears

OR91 9x1mm O-Ring Spool Spur ORing used with thick / ball diff-styled spur gears

OR155SI 1.5x5mm O-Ring x4 Red ORing for use within the front spindle

OR153V 1.5x3mm O-Ring x2 Rear Dampener ORing

OR15 1x5mm O-Ring x 2 Oring used on the rear axle bearing

Awesomatix MMX Swingarm Kit (4pcs)+8,5 / +9,5 (Option)Due to, even when it´s not much, the wider spur we were able to improve the roll behavior and...

OfficinaRC Bearing Housing directly replace the standard composite ones included in the kit./>Made in Italy in Ergal 7075 they reduce friction a...

Make your model lighter, agile and sturdier. OfficinaRC 4.8x6mm Titanium Ball Studs are designed for the Awesomatix cars. The “OfficinaRC Ball Stu...

Front bulkhead brace

SPR07 - E-Ring x 10

AT144 ULCG Battery Clamp x2 AT144 ULCG Battery Clamp (2pcs) is specially designed for the use of modern ULCG style Lipos batteries. They are machin...

BEL351LF LOW FRICTION Belt 351mm BEL351 Normal 351mm Belt

AM177-2 Motor Mount

OR14V Suspension Arm O-Ring