Car Accessories
Car Accessories
Team APEX RC Tweak Eliminator System with Case
Team EAMThe team at APEX RC would like to introduce their own Tweak Eliminator System (TES) for 1/10 electric touring cars. The TES was developed by racers...
View full detailsLEESPEED 64 Pitch Spur Gear for Pan Car.
LEESPEEDLEESPEED Spur gears are made with high quality Derlin® material. The material and design is different than any other brand on the market. This inno...
View full detailsLEESPEED 64 Pitch Spur Gear for Touring Car.
LEESPEEDLEESPEED Spur gears are made with high quality Derlin® material. The material and design is different than any other brand on the market. This inno...
View full detailsLEESPEED 64 Pitch Aluminum Pinion Gear.
LEESPEEDLEESPEED pinion gears are made with high quality aluminum and then hardcoated for durability. The design and material make LEESPEED the lightest an...
View full detailsLEESPEED 64 Pitch Titanium Pinion Gear.
LEESPEEDLEESPEED Titanium pinion gears are made with high quality Titanium material. The design and material make LEESPEED the lightest and truest gears on...
View full detailsHiro Seiko Alloy . M3x10
Hiro SeikoHiro Seiko Alloy 3x10mm screws.
Hiro Seiko 3mm Stainless steel set screw.
Hiro SeikoITEM NUMBER 69098 DESCRIPTION 3mm Stainless Steel Set Screw COLOR - USE FOR General SERIES Miscellaneous REMARK ◆ 10 pcs / pack
R1 30x15 Premium Fan. 8.4V
R1 Wurks10 grams of thrust at 8.44 volts. Plug into receiver or wire directly to the speed controller for more air flow.
Xray 4.9mm Ball end with 10mm threads.
XrayThreaded 4.9mm ball end with 10mm thread lengthfor connection to molded ball joints. Set of 2.
Xray Silicone O-ring 3x2 (10)
XraySilicone O-ring fits over 3mm shaft. 2mm thick. Set of 10 pieces
Pro-Line Tire Glue
ProlineThis is a 0.7 ounce bottle of Pro-Line Pro-Bond CA Tire Glue. Pro-Line’s Pro-Bond Tire Glue has a hold strength of 3,200 PSI (Test Method: Steel on...
View full detailsGravity USGT (non belted)
GravityGravity USGT Tires mounted on Black Rims
TQ Wire Sensor Cable
TQ WireTQ BL sensor cables are made from high quality silicone insulated wire and tube. These units are extremely soft and flexible. They will n...
View full detailsXRAY T4 Alu Shim 3X6X.5-1MM - Orange or Black
XRayAlu Shim 3X6X1.0MM - Orange or Black (10pcs)
Xray ECS Drive Shaff for 2mm Pin (1)
XrayXray ECS Drive Shaft. Select Size.
Xray Anti-Roll Bar for Ball Bearing bulkheads
XrayXray Sway Bars for T4 with Ball Bearing Bulkheads. Select option in drop down menu
Hudy Ultimate Silicone Oil.
HudyHUDY Premium Silicone Oils are manufactured in Europe by a specialized silicone oil premium manufacturer and were created exclusively fo...
View full detailsSXT Tire Sauce
SXTSXT Tire Sauce. The standard for all carpet racing.
Team EAM Tungsten Weight
Team EAMNew from Team EAM is custom cut and ground tungsten weights. Almost twice as heavy as its lead counter part but a much smaller profile to keep the...
View full detailsRC Mission High Compression Piston for PGI and PGI-Y
RC-MISSIONHigh compression piston for shock insert kit.
Duratrax Fluorescent Color
DuratraxDuratrax Paint (Normal and Candy Colors)
DuratraxAll Duratrax paint except Fluorescent.
RC-Mission DCJ Axle 2pcs for Xray T4 Normal Size
RC-MISSIONRC Mission replacement axle shafts
XRAY T4 4S Spring Set.
XrayThis is a replacement XRAY 4S Spring Set C, and is intended for use with the XRAY T4 1/10 scale electric touring car. These springs can be used on ...
View full detailsBall End 4.9mm With Thread 8mm (2)
XrayThreaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2.
Proline Prime Slick Tires. MC Compound.
ProlineThis is a pack of two Pro-Line Prime 2.2" Rear Buggy Tires. Many indoor off-road race tracks have turned to carpet or pure clay st...
View full detailsHyperdrive battery tape
HyperdriveHyperdrive Fiberglass reinforced Battery Tape. Some of the best in the industry.
PROTOform Better Edge Sanding Drum
protoformThis is the Protoform Better Edge: Sanding Drum. There has never been a product specifically made for r/c racers to finish off th...
View full detailsTeam Associated 8mm Ballstud-Long
Team Associated / ReedyThis is a pack of six replacement Team Associated 8mm Long Ballstuds.
Arrowmax Body Post Trimmer
ArrowmaxThe Arrowmax Body Post Trimmer will cut the body post flat and round the edges perfectly.
Pro-Spec Differential Oil
Pro-SpecProfessional racing spec differential oil series 100% PURE Racing silicone damper oil Silicon oil differential of quality-oriented production with ...
View full detailsProtoform 1971 Camaro Z28 VTA Body
protoformThe PROTOform 1971 Chevrolet Camaro Z28 VTA Body replicates one of the most iconic muscle cars of the '70s. The Z28 tore up both the...
View full detailsRacing Performer Ultra Front and Rear Springs.
Racing PerformerThis is a pack of two Yokomo RP (Racing Performer) Ultra Front Buggy Springs. The RP line of Yokomo Springs are designed to provide ...
View full detailsYokomo Yatabe Turf/Carpet Rear Springs
YokomoYokomo Yatabe Arena Big Bore Rear Shock Springs were developed for extremely high traction surfaces, such as turf or carpet. These ...
View full detailsAKA 1/10th Buggy EVO Slick (Clay).
AKAThe Slicks are a treadless tire designed for maximum performance on high-grip, indoor clay tracks. They are available in Clay and Ultra Soft...
View full detailsAKA EVO 1/10th Scale Buggy Wheels
AKAThis is a pack of two white AKA Racing "EVO" Wheels. AKA 1/10 EVO wheels have taken 1/10 scale buggy racing to the next level by ...
View full detailsAvid Aura Gearbox Bearing Kit
AVIDThis is an AURA bearing kit by Avid RC.Really frees up the transmission
Team Associated Silicon Shock Oil
Team Associated / ReedyThis is a 2oz bottle of Team Associated silicone shock oil used with oil filled shocks. Team Associated shock oil is made from 100% pure silicone o...
View full detailsTeam Associated Silicone Diff Fluid
Team Associated / ReedyFactory Team Silicone Fluids are made of the highest quality materials and are laboratory-tested, resulting in a high-performance blend of premium ...
View full detailsAssociated B6 Rear Arms
Team Associated / ReedyTeam Associated B6 Rear Arms. These are the replacement rear arms for the RC10 B6 and B6D buggies. Package includes left and right s...
View full detailsAssociated B6 Front Arms
Team Associated / ReedyTeam Associated B6 "Gullwing" Front Arms. These are the replacement gullwing front arms for the RC10 B6D, but when combined with the gullwing front...
View full detailsTeam Associated B64 Front Arms
Team Associated / ReedyTeam Associated B64 "Hard" Front Arms. These are the "hard" compound front arms for the B64D buggy. Package includes two front arms and spacers. Se...
View full detailsTeam Associated TiN Shock Shaft V2
Team Associated / ReedyTeam Associated V2 Ti-Nitride Screw Mount Front Shock Shaft. These are compatible with the B64D and B6 vehicles. Package includes two shock shafts ...
View full detailsTeam Associated B64 Sway Bar Sets
Team Associated / ReedyB64 Front Sway Bar Sets
Team Associated T-Nut and Diff Bolt
Team Associated / ReedyThis is a replacement t-nut, and thrust bolt set for the Team Associated RC10GT2 1/10th scale off-road truck. This set includes one thrust bolt, on...
View full detailsTeam Associated B64 Hinge Pin set
Team Associated / ReedyB64 Hinge Pin Set.
Team Associated B64 Rear Hubs
Team Associated / ReedyThis is a replacement set of Team Associated Rear Hubs, suited for use with the B64 4-Wheel Drive buggy.
Team Associated B64 Carbon Fiber Front Shock Tower
Team Associated / ReedyB64 Front Shock Tower, woven carbon fiber