Awesomatix
Filters
A12 Awesomatix LWRD Lightweight Rear Damper set
AwesomatixLWRD Lightweight Rear Damper set
A12-AM1207
AwesomatixA12-AM1207
A12-AT1204-S Steering block
AwesomatixAwesomatix A12 Steering Block Short. The Steering Block overall height is 1,4mm less, which provides additional 0,7mm space for droop/ride height ...
View full detailsA12-AT1204-ZT-S Steering block
AwesomatixAwesomatix A12 Steering Block Zero Trail Short. The Steering Block overall height is 1,4mm less, which provides additional 0,7mm space for droop...
View full detailsA12-C1201-X
AwesomatixC1201-X Servo Plate
A12-C1205-X
AwesomatixC1205-X Suspension Plate
A12-C1205-X-1.5
AwesomatixC1205-X-1.5 Suspension Plate
A12-C1205AFS-1.5
AwesomatixA12-C1205AFS-1.5
A12-DT1214
AwesomatixDT1214 Downstop Screw Holder New part for the recent update to the A12WC A12WC UPDATE INFO: ST1202 is replaced by ST1202-XS in this kit (UPDATE 21...
View full detailsA12-GD
AwesomatixA12-GD
A12-LRC
AwesomatixLRC Set LRC (Low Roll Center) set is +1mm higher roll center measured from the lower face of AM1204 compared to ELRC. LRC set is the kit's set f...
View full detailsA12-P1213
AwesomatixP1213 Ball Cup 4.0mm x 2
A12-SCS
AwesomatixSCS Spherical Contact Shims set The Spherical Contact Shims set can be installed in the rear ball joint (ST1209M) instead of the OR125 O-ring. The...
View full detailsA12-SSS
AwesomatixSSS Spring Steel Spool Set Same spool axle that is included in the A12 kit -- just packaged to included the necessary spur nut (A12-AT1215) and two...
View full detailsA12-ST1208-C4ST
AwesomatixST1208-C4ST Steel Steering Block Post 4deg. x2
A12-ST1208-C5ST
AwesomatixST1208-C5ST Steel Steering Block Post 5deg. x2
A12-ST1209-L Ball Stud Long/A12-ST1209-M Ball Stud
AwesomatixST1209-M Ball Stud ST1209-L Ball Stud
A700-AT22M
AwesomatixAT22M - Rear Body Holder x2 Now uses 3mm screw for a strong hold on the rear body post
A700-AT25-44 Turnbuckle 44mm x 4
AwesomatixTurnbuckle 44mm x 4
A700-B415
AwesomatixB415 - 4x1.5mm ball bearings x 8 For the IFJ / IRJ
A700-B63SS Bearing
AwesomatixB63SS MR63ZZ Bearing x 2 For A800 belt tensioner
A700-P06-1
AwesomatixP06-1 - Downstop Collar x 5 This downstop collar is slotted to resist twisting, replacing the A700-P06 part
A700-P13-4
AwesomatixP13-4 Open Ball End x 2 The parts are designed to replace the standard upper inner pivots for the camber and caster links of the A700 touring car t...
View full detailsA700-SH5X7X0.1
AwesomatixSH5X7X0.1 - 5x7x0.1mm Shim x 4 Shim for the D2.2 Dampeners