xray
Xray Composite C-Hub for Body Upstop
XrayCOMPOSITE C-HUB FOR BODY UPSTOP RIGHT - 4° DEG. - GRAPHITE
Xray Composite Front Lower Chassis brace XB2
xrayXRAY XB2 Hard Composite Front Lower Chassis Brace. This is the replacement hard lower chassis brace for the XB2 1/10 buggy.
Xray Composite Gear 36T or 38T Graphite for XB2/XT2 Transmission
XrayMolded 36T or 38T gear made from specially-formulated graphite composite material gives the perfect balance between reliability and performance.
Xray Composite Roll Bar Holder
XrayThis is a set of replacement XRAY Composite Anti-Roll Bar Holders, and are intended for use with the XRAY T2 family of vehicles.
Xray Composite Servo Saver X-Stiff V2.
XrayMolded composite servo saver set - extra stiff. Consists of 4 springs to make the servo saver strong enough to prevent extreme steering deflection ...
View full detailsXray Composite Solid Axle set
XrayThis is a replacement XRAY 38 Tooth Composite Solid Axle Set, and is intended for use with the XRAY T2 008, T2 009 and T2R Pro. This unique lightwe...
View full detailsXray Drive Axle Lightweight Spring Steel
XrayThis is a optional XRAY Lightweight Hudy Spring Steel Drive Axle, and is intended for use with the XRAY T2 family of vehicles. This super lightweig...
View full detailsXray Drive Shaft Replacement Caps. Low Friction Orange.
XRayLow-friction 3.5mm drive pin clips for protecting and cushioning drive shaft pin in diff outdrives. Made from all-new, extra-strong composite mixtu...
View full detailsXray ECS Drive Shaff for 2mm Pin (1)
XrayXray ECS Drive Shaft. Select Size.
Xray ECS Drive Shaft Case for 2mm pin
XrayECS Drive Shaft Case made from HUDY Spring Steel™ fits #305330 and #305331 ECS drive shafts. The drive shaft case is updated for the stronger 2mm p...
View full detailsXray Foam Battery Spacer
XrayThe foam spacer battery is used to move the battery pack either front or rear to adjust the weight balance. Depending on the position of the batter...
View full detailsXray Front Spring Set (2)
XrayThe springs have been specifically designed to complement the big bore shocks. The spring rate is constant during the entire spring compression. Th...
View full detailsXray Hex Screw SFH M2.5x6 (10)
XrayXray Hex Screw SFH M2.5x6 (10) Fits Gear Diff
Xray m3x10mm Setscrew (10)
XrayThis is a pack of ten replacement XRAY 3x10mm Set Screws, and are intended for use with the XRAY T2 009, T3, T3R and T3'12 1/10 touring cars, as we...
View full detailsXray M3x12 Hex Screw
XrayXray M3x18 Hex Screw 903318
Xray Molded Servo Arms
xrayThis is a set of replacement servo arms for the Xray XB8 line of buggies. This set of molded composite servo arms includes double-arm for throttle ...
View full detailsXray Outter Arm Pivot for T4
XrayThis is a set of two replacement front suspension pivot pins for the XRAY T2 1/10th scale touring car. Lower outer pivot pins. Hardened for very hi...
View full detailsXray Pan Car Side Spring
xrayThis is a pack of two optional XRAY Black 1.2 Rate Side Springs. These springs are harder than the stock Gold springs.
Xray Rear Spring Set (2)
xrayThe springs have been specifically designed to complement the big bore shocks. Set of 2. The spring rate of the linear springs is constant during t...
View full detailsXray Silicone O-ring 3x2 (10)
XraySilicone O-ring fits over 3mm shaft. 2mm thick. Set of 10 pieces
Xray Special 110 degree Hex screw set for 1.5mm Alumn Chassis (Must only be used with 301020 chassis)
Xray**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...
View full detailsXray Stainless Steel Battery Weight
xrayXRAY XB2 Stainless Steel Battery Weight was developed to be placed beneath battery to add weight as low as possible. This helps to make the car eas...
View full detailsXray Steel Bushing Long set for XB4/XT2/XB2
xrayThis is a pack of two replacement XRAY Long Steel Steering Bushings, and are intended for use with the XRAY XB4 1/10 scale 4WD buggy. These bushing...
View full detailsXRAY T4 4S Spring Set.
XrayThis is a replacement XRAY 4S Spring Set C, and is intended for use with the XRAY T4 1/10 scale electric touring car. These springs can be used on ...
View full detailsXray T4 2019 Alum Front Chassis Stiffner
xrayXRAY T4 2019 Aluminum Chassis Stiffener. CNC-machined chassis stiffener made from premium 2.0mm Swiss 7075 T6 aluminum. The front brace – which can...
View full detailsXRAY T4 2020 - Graphite Bumper Brace
XrayNew T4'20 Graphite Bumper Upper Holder Brace 3.0mm • Reinforces bumper assembly • Reduce chassis breakage in serious crashes • Machined from premiu...
View full detailsXRAY T4 Alu Shim 3X6X.5-1MM - Orange or Black
XRayAlu Shim 3X6X1.0MM - Orange or Black (10pcs)
XRAY T4 Alu Solid Axle Driveshaft Adapters - Hard Coated (2)
XRayThis is a pack of two optional XRAY Aluminum Solid Axle Driveshaft Adapters, and are intended for use with the XRAY T2 008 EU and US, T2 009 EU and...
View full detailsXray T4 BB Drive Shaft Set
XrayNew T4 ECS BB DRIVE SHAFT – SET Ball-bearing equipped ECS drive shafts Reduced friction between driveshaft and outdrive Ball-bearings replace comp...
View full detailsXray T4 Belt
xrayThis is an optional Kevlar front drive belt for the XRAY T2 1/10th scale touring car. Ultra-Flex High-Performance Drive Belt For top competition ra...
View full detailsXRAY T4 Composite ECS C-Hub - 4 deg (Medium)
XRayXRAY T4 Composite ECS C-Hub - 4 deg (Medium)
XRAY T4 Composite Steering Block - Graphite - V2
XRayComposite Steering Block - Graphite - V2
XRAY T4 Diff Gasket (4)
XRayDiff Gasket (4)
Xray T4 front body mount set
XrayFront body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1. Update: Composite brace for bu...
View full detailsXray T4 Front Sway Bar
XrayXray T4 Front Sway Bar
Xray T4 Graphite Body Upstop 2mm (2)
XrayXray T4 Graphite Body Upstop 2mm (2)