Xray

XRA302144-M Xray X4'24 CFF Carbon-Fiber Fusion Front Upper Arm Medium Front Left or Right Rear This part is specifically for the X4'24

X4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR

Gear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears. Molded from an all...

New T4 ECS BB DRIVE SHAFT – SET Ball-bearing equipped ECS drive shafts Reduced friction between driveshaft and outdrive Ball-bearings replace comp...

Shock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering. Xray 378...

Three Circuit Switch Power Switch

XRAY XB2 Composite Steering Plate. This is the replacement steering plate for the XB2 1/10 buggy.

This is a set of four replacement steel steering bushings for the XRAY T2 1/10th scale touring car. Bushings are precision machined and are used fo...

Xray ECS Drive Shaft.  Select Size.

**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...

**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...

X4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g

X4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - LEFT

X4 ALU CASTER BUSHING FRONT 4° / REAR 1.5° - 2 DOTS (4)

X4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - LEFT

X4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)

This is a replacement XRAY XB2 Hard Front Low Mounting Suspension Arm Right , intended for use with the XB2C 2020 Carpet Edition and XB2D 2020 Dirt...

Composite Steering Block - Graphite - V2

14-tooth bevel-drive steel gear for front/rear differential. Additionally hardened for increased lifespan and reliability

HARD molded composite C-hub for RIGHT steering block. Made from super-tough, high-tech composite material. Caster pre-set at 9°. For use with match...

301079 Xray X4A'23 Graphite Upper Deck - Split Front - 2.0mm

X4 ANTI-ROLL BAR - FRONT 1.3 MM

Xray T4'20 Solid Axle ESC BB Driveshart adapter.  2 spring steel adapters for BB drive shafts

Xray Composite Ball Joint 4.9mm Extra short (open)

This is a set of replacement servo arms for the Xray XB8 line of buggies. This set of molded composite servo arms includes double-arm for throttle ...

Large external spur gear for center differential. Molded from specially-formulated tough composite material. Tooth number stamped for easy identifi...

303833 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.3 mm

303831 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.1 mm

302832 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Front 1.2 mm

302831 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Front 1.1 mm

XRA303183-H Xray X4'24 CFF Carbon-Fiber Fusion Rear Lower Arm Hard - Inner Shock Position This part is specifically for the X4'24

XRA303182-H Xray X4 CFF Carbon-Fiber Fusion Rear Lower Arm Hard Right - Inner Shock Position This part is specifically for the X4'24

XRA302183-H Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Left - Inner Shock Position This part is specifically for the X4'24

XRA302182-H Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Right - Inner Shock Position This part is specifically for the X4'24

302971 Xray Xlp Alu Shock Tower Rear - Swiss 7075 T6

X4 GEAR DIFFERENTIAL - SET

X4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - RIGHT

X4 ANTI-ROLL BAR - FRONT 1.1 MM

X4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - RIGHT

X4 ALU HUB - SWISS 7075 T6

This is a replacement XRAY 38 Tooth Composite Solid Axle Set, and is intended for use with the XRAY T2 008, T2 009 and T2R Pro. This unique lightwe...

This is a pack of ten replacement XRAY 3x10mm Set Screws, and are intended for use with the XRAY T2 009, T3, T3R and T3'12 1/10 touring cars, as we...

ECS Drive Shaft Case made from HUDY Spring Steel™ fits #305330 and #305331 ECS drive shafts. The drive shaft case is updated for the stronger 2mm p...

Composite lower arm mount has an integrated 26° kick-up angle. The composite arm mount generates more front traction.

This is a replacement XRAY 14T Composite Bevel Drive Gear, and is intended for use with the XRAY XB4 1/10 scale 4WD buggy. This gear is used in the...