Xray
Front Upper Arm Medium or Soft Front Left or Right Rear
XrayXRA302144-M Xray X4'24 CFF Carbon-Fiber Fusion Front Upper Arm Medium Front Left or Right Rear This part is specifically for the X4'24
X4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR
XrayX4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR
Gear Diff Bevel and Satelite Gears.
XRayGear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears. Molded from an all...
View full detailsXray T4 BB Drive Shaft Set
XrayNew T4 ECS BB DRIVE SHAFT – SET Ball-bearing equipped ECS drive shafts Reduced friction between driveshaft and outdrive Ball-bearings replace comp...
View full detailsX4 COMPOSITE HUB - Hard
XrayX4 COMPOSITE HUB - Hard
Xray X12 Shock Spring
XrayShock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering. Xray 378...
View full detailsHudy Switches for Tire Truer
XrayThree Circuit Switch Power Switch
XB2 Composite Steering Plate
XrayXRAY XB2 Composite Steering Plate. This is the replacement steering plate for the XB2 1/10 buggy.
Xray T4 Steel Steering Block Bushing
XrayThis is a set of four replacement steel steering bushings for the XRAY T2 1/10th scale touring car. Bushings are precision machined and are used fo...
View full detailsXray ECS Drive Shaff for 2mm Pin (1)
XrayXray ECS Drive Shaft. Select Size.
Xray Special 110 degree Hex screw set for 1.5mm Alumn Chassis (Must only be used with 301020 chassis)
Xray**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...
View full detailsXray 1.5mm Flex Chassis (DOES NOT COME WITH SPECIAL SCREWS)
Xray**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...
View full detailsX4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g
XrayX4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g
X4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - LEFT
XrayX4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - LEFT
X4 ALU CASTER BUSHING FRONT 4° / REAR 1.5° - 2 DOTS (4)
XrayX4 ALU CASTER BUSHING FRONT 4° / REAR 1.5° - 2 DOTS (4)
X4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - LEFT
XrayX4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - LEFT
X4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)
XrayX4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)
Xray XB2 2020 Front Suspension Arm
XrayThis is a replacement XRAY XB2 Hard Front Low Mounting Suspension Arm Right , intended for use with the XB2C 2020 Carpet Edition and XB2D 2020 Dirt...
View full detailsXRAY T4 Composite Steering Block - Graphite - V2
XRayComposite Steering Block - Graphite - V2
Xray T4'20 O-Ring 5x1 (10)
XrayXray T4'20 O-Ring 5x1 (10) for spur gear mount.
Xray XB4 Steel Bevel Gear 14T
XRay14-tooth bevel-drive steel gear for front/rear differential. Additionally hardened for increased lifespan and reliability
Xray XB4 Compostie C-Hub 9 Degree. Left/Right Hard.
XRayHARD molded composite C-hub for RIGHT steering block. Made from super-tough, high-tech composite material. Caster pre-set at 9°. For use with match...
View full details301079 Xray X4A'23 Graphite Upper Deck - Split Front - 2.0mm
Xray301079 Xray X4A'23 Graphite Upper Deck - Split Front - 2.0mm
X4 ANTI-ROLL BAR - FRONT 1.3 MM
XrayX4 ANTI-ROLL BAR - FRONT 1.3 MM
Xray T4'20 Solid Axle ESC BB Driveshart adapter
XrayXray T4'20 Solid Axle ESC BB Driveshart adapter. 2 spring steel adapters for BB drive shafts
ALU STEERING BLOCKS WITH GRAPHITE EXTENSION PLATES - SET
XrayALU STEERING BLOCKS WITH GRAPHITE EXTENSION PLATES - SET
Xray Composite Ball Joint 4.9mm Extra short (open)
XrayXray Composite Ball Joint 4.9mm Extra short (open)
Xray Molded Servo Arms
xrayThis is a set of replacement servo arms for the Xray XB8 line of buggies. This set of molded composite servo arms includes double-arm for throttle ...
View full detailsXray XB4 Center Diff Gears
xrayLarge external spur gear for center differential. Molded from specially-formulated tough composite material. Tooth number stamped for easy identifi...
View full detailsXray X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.3 mm
Xray303833 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.3 mm
X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.1 mm
Xray303831 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Rear 1.1 mm
Xray X424' Anti-Roll Bar Uam - Under Arm Mount - Front 1.2 mm
Xray302832 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Front 1.2 mm
Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Front 1.1 mm
Xray302831 Xray X4 Anti-Roll Bar Uam - Under Arm Mount - Front 1.1 mm
Xray X4'24 CFF Carbon-Fiber Fusion Rear Lower Arm Hard
XrayXRA303183-H Xray X4'24 CFF Carbon-Fiber Fusion Rear Lower Arm Hard - Inner Shock Position This part is specifically for the X4'24
Xray X4 CFF Carbon-Fiber Fusion Rear Lower Arm Hard Right -
XrayXRA303182-H Xray X4 CFF Carbon-Fiber Fusion Rear Lower Arm Hard Right - Inner Shock Position This part is specifically for the X4'24
Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Left
XrayXRA302183-H Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Left - Inner Shock Position This part is specifically for the X4'24
Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Right
XrayXRA302182-H Xray X4'24 CFF Carbon-Fiber Fusion Front Lower Arm Hard Right - Inner Shock Position This part is specifically for the X4'24
302971 Xray Xlp Alu Shock Tower Rear - Swiss 7075 T6
Xray302971 Xray Xlp Alu Shock Tower Rear - Swiss 7075 T6
X4 GEAR DIFFERENTIAL - SET
XrayX4 GEAR DIFFERENTIAL - SET
X4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - RIGHT
XrayX4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - RIGHT
X4 ANTI-ROLL BAR - FRONT 1.1 MM
XrayX4 ANTI-ROLL BAR - FRONT 1.1 MM
X4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - RIGHT
XrayX4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - RIGHT
X4 ALU HUB - SWISS 7075 T6
XrayX4 ALU HUB - SWISS 7075 T6
Xray Composite Solid Axle set
XrayThis is a replacement XRAY 38 Tooth Composite Solid Axle Set, and is intended for use with the XRAY T2 008, T2 009 and T2R Pro. This unique lightwe...
View full detailsXray m3x10mm Setscrew (10)
XrayThis is a pack of ten replacement XRAY 3x10mm Set Screws, and are intended for use with the XRAY T2 009, T3, T3R and T3'12 1/10 touring cars, as we...
View full detailsXray ECS Drive Shaft Case for 2mm pin
XrayECS Drive Shaft Case made from HUDY Spring Steel™ fits #305330 and #305331 ECS drive shafts. The drive shaft case is updated for the stronger 2mm p...
View full detailsXray XB2 Lower Front Arm Mount 26* kickup
XrayComposite lower arm mount has an integrated 26° kick-up angle. The composite arm mount generates more front traction.
Xray XB4 Composite Bevel Drive Gear 14T
xrayThis is a replacement XRAY 14T Composite Bevel Drive Gear, and is intended for use with the XRAY XB4 1/10 scale 4WD buggy. This gear is used in the...
View full details