Xray
Filters
Xray Composite Gear 36T or 38T Graphite for XB2/XT2 Transmission
XrayMolded 36T or 38T gear made from specially-formulated graphite composite material gives the perfect balance between reliability and performance.
XRAY T4 High-Performance Low Friction Kevlar Drive Belt Rear 3 X 189 MM 305447
XRayXRAY T4 High-Performance Low Friction Kevlar Drive Belt Rear 3 X 189 MM 305447
XRAY T4 Diff Gasket (4)
XRayDiff Gasket (4)
Xray Composite C-Hub for Body Upstop
XrayCOMPOSITE C-HUB FOR BODY UPSTOP RIGHT - 4° DEG. - GRAPHITE
XRAY T4 2020 - Graphite Bumper Brace
XrayNew T4'20 Graphite Bumper Upper Holder Brace 3.0mm • Reinforces bumper assembly • Reduce chassis breakage in serious crashes • Machined from premiu...
View full detailsXray Tungsten Weight
XrayXray Tungsten weights. 30g and 13g pieces.
Xray Alu Shim 3x6x3mm (10pcs)
xrayThis is a pack of ten black XRAY 3x6x3.0mm Aluminum Shims.
Xray X12 Composite Body Post
XrayHeavy-duty body post set for XRAY XII made from molded composite material. Includes posts, body holder plates and pins. Set of 2.
Ball End 4.9mm With Thread 8mm (2)
XrayThreaded 4.9mm ball end with 8mm thread length for connection to molded ball joints. Set of 2.
X4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FR/RL
XrayX4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FR/RL
Xray Gear Diff Metal Bevel and Satellite Gears
XRayDifferential gears for gear differentials are made from pressed steel, heat treated, and machined for ultra-precision and smooth operation. Include...
View full detailsAlu Dual Servo Saver Arm + Ball-Bearings (2)
XRaySet of 2 left & right (identical) alu arms for dual servo saver. Ultra-strong construction provides long life and durability in even the most e...
View full detailsX4 GRAPHITE UPPER DECK 1.6MM
XrayX4 GRAPHITE UPPER DECK 1.6MM
Xray XB4, XB2, XT2 Shock Shafts
XrayHardened, high-strength front shock shafts are polished for super-smooth operation. Set of 2.
Xray XB2 Hard/Graphite Front Lower Suspension Arm
XRayFront lower suspension arm made from specially-formulated graphite or hard composite material. The exclusive composite mixture used for suspension ...
View full detailsXRAY T4 Rear Suspension Arm - Graphite - 1-Hole
XRayRear Suspension Arm - Graphite - 1-Hole
Xray T4 Eccentric Bushing Set.
XrayEccentric bushings for adjusting suspension settings, made from tough composite. Fits XB4 alu suspension holders. Using eccentric suspension bushin...
View full detailsXray T4 Composite Solid Axle Driveshaft Adapter
XrayMolded-composite diff drive shaft adapters for #305184/305188 XRAY Composite Solid Axle. Modular design with composite output shafts allows for eas...
View full detailsX4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR
XrayX4 CFF™ CARBON-FIBER FUSION UPPER ARM - MEDIUM - FL/RR
Xray 50mm Hard Coated Drive Shaft
XrayThis is a optional XRAY 50mm, Hard Coated 7075 T6 Aluminum, Drive Shaft, and is intended for use on the rear of the XRAY T2 US Edition vehicles. Th...
View full detailsXray Anti-Roll Bar 1.0mm Set with Hardware for XB2/XB4/XT2
XrayThis is an optional XRAY 1.0mm XB2 Anti-Roll Bar Set, including a 1.0mm bar and the necessary mounting hardware.
Gear Diff Bevel and Satelite Gears.
XRayGear differential internal gears precision made from new graphite composite mixture. Includes 2 bevel gears + 4 satellite gears. Molded from an all...
View full detailsFront Upper Arm Medium or Soft Front Left or Right Rear
XrayXRA302144-M Xray X4'24 CFF Carbon-Fiber Fusion Front Upper Arm Medium Front Left or Right Rear This part is specifically for the X4'24
308083 Xray Xlp Shock Absorber Membrane (4)
Xray308083 Xray Xlp Shock Absorber Membrane (4)
X4 GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM
XrayX4 GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM
X4 GRAPHITE UPPER DECK - SPLIT FRONT - 2.0MM
XrayX4 GRAPHITE UPPER DECK - SPLIT FRONT - 2.0MM
Xray T4 BB Drive Shaft Set
XrayNew T4 ECS BB DRIVE SHAFT – SET Ball-bearing equipped ECS drive shafts Reduced friction between driveshaft and outdrive Ball-bearings replace comp...
View full detailsXray Composite Shock Ball Joint 21mm
XrayThe XRAY 21mm Shock Ball Joints are 4mm longer than the standard ball joints, providing more down travel. Compatible with the XB4 and XB2 models, t...
View full detailsX4 COMPOSITE HUB - Hard
XrayX4 COMPOSITE HUB - Hard
Xray X12 Shock Spring
XrayShock spring for central shock absorber with progressive C=1.4-1.9. Increased overall traction, steering response, and off-power steering. Xray 378...
View full detailsHudy Switches for Tire Truer
XrayThree Circuit Switch Power Switch
Xray Wheel Shim (2)
XrayThis is a set of two XRAY 0.75mm Offset Aluminum Wheel Shims, and are intended for use with the XRAY T2 family of vehicles.
Xray Gear Diff replacement axle shaft
xrayThis strong, lightweight rear axle is for use with XRAY gear diffs in 1/12 and 1/10 pan cars, as well as 1/10 formula cars. This super-light and to...
View full detailsXB2 Composite Steering Plate
XrayXRAY XB2 Composite Steering Plate. This is the replacement steering plate for the XB2 1/10 buggy.
Xray T4 Steel Steering Block Bushing
XrayThis is a set of four replacement steel steering bushings for the XRAY T2 1/10th scale touring car. Bushings are precision machined and are used fo...
View full detailsXRAY T4 Composite Ball Joint 4.9MM - Closed With Hole (4)
XRayComposite Ball Joint 4.9MM - Closed With Hole (4)
Xray ECS Drive Shaff for 2mm Pin (1)
XrayXray ECS Drive Shaft. Select Size.
Xray 6mm Body Clip.
XRayHeavy-duty clip for 6mm body post or for securing transponder to transponder mount. Set of four pieces.
Xray Special 110 degree Hex screw set for 1.5mm Alumn Chassis (Must only be used with 301020 chassis)
Xray**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...
View full detailsXray 1.5mm Flex Chassis (DOES NOT COME WITH SPECIAL SCREWS)
Xray**** 1.5mm chassis requires special low profile screws for installation, #913300. Standard countersunk screws will not fit and may cause damage to...
View full detailsALU WHEEL SHIM OFFSET 1.0MM (2)
XrayALU WHEEL SHIM OFFSET 1.0MM (2)
X4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g
XrayX4 BRASS WEIGHT NICKEL COATED FOR MOTOR MOUNT 4g+4g+8g
X4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - LEFT
XrayX4 CFF™ CARBON-FIBER FUSION REAR LOWER ARM - HARD - LEFT
X4 ALU CASTER BUSHING FRONT 4° / REAR 1.5° - 2 DOTS (4)
XrayX4 ALU CASTER BUSHING FRONT 4° / REAR 1.5° - 2 DOTS (4)
X4 ANTI-ROLL BAR - FRONT 1.2 MM
XrayX4 ANTI-ROLL BAR - FRONT 1.2 MM
X4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - LEFT
XrayX4 CFF™ CARBON-FIBER FUSION FRONT LOWER ARM - HARD - LEFT
X4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)
XrayX4 TOP DECK HEX SCREW M3x5.5 - HUDY SPRING STEEL™ (2)
Xray X12 Composite Steering Block for 4mm King Pin (Graphite)
XrayXray 372224 Composite Steering Block For 4Mm King Pin - Left - Graphite Xray 372214 Composite Steering Block For 4Mm King Pin - Right - Graphite