MR33 Tire Roller 1:10 HUDY Touring Car Tires

The MR33 tyre roller is used to prepare your racing tyres.
As you’re no doubt aware, many riders ‘roll’ their new tyres over the setup board, applying a little pressure, before using them for the first time.
This process serves to ‘break down’ the superglue in places where too much tyre adhesive may have been used. Rolling the tyre
also helps to flatten the tyre insert slightly, which increases the air gap (the space) between the insert and the tyre rubber.
If you simply use an Allen key or another tool for rolling, you cannot apply even pressure. You
also end up pressing directly on the edge of the hole through which the wheel axle will later be inserted, which can cause it to warp – anything but perfect!

The 3D-printed MR33 tyre roller is the perfect solution.
It fits perfectly into the rim and ensures even contact and pressure during rolling. The hole in the rim is not subjected to stress
and retains its original shape. 

Contents: 1 x MR33 tyre roller for HUDY rims (1:10 electric touring cars)