Introducing our brand new 2mm, .5, 1mm Roll Centre Shim Plates for the Mugen MTC2!
Changing the roll centre on the Mugen MTC2 can be a pain, having to totally remove each screw and place shims under whilst lining it all up and tightening again. Well now you can say goodbye to that! Our Roll Centre Shim Plates slide in and out without the removal of your screw. This keeps everything attached, and you can adjust the roll centre in seconds!
You can use them for all sections of the car, FF, FR, RF and RR. The Front and Rear are different and have different spacing, which can be identified by the dimples machined into the spacers, being 1 for front and 2 for rear.
The central hole allows easy removal by inserting a 1.5mm driver and sliding them out from the top.
The set includes 2x 2mm front and 2x 2mm rear, so you can get those high roll centres easily! They are completely compatible with our 0.5/1mm set, so you can fine tune above 2mm!
Note: These can only be used on the Aluminium Chassis, and our SlimFlex 2.2mm Carbon Chassis. Due to the recesses on the Standard Kit Carbon Chassis, we do not recommend using these if you are using the standard carbon chassis.
- Slide in and out installation and removal for super fast and stress free roll centre changes at the track
- Allows aggressive 2mm roll centre change for high roll centre setups
- Compatible with our 0.5/1mm set for fine tuning above 2mm.
- CNC Machined in Australia from 2mm 3K Gloss Carbon Fibre