Awesomatix

LRC Set LRC (Low Roll Center) set is +1mm higher roll center measured from the lower face of AM1204 compared to ELRC.  LRC set is the kit's set f...

C1205-X Suspension Plate

C1201-X Servo Plate

A12-AT1207-X

ST1208-C6ST Steel Steering Block Post 4deg. x2

ST1208-C5ST Steel Steering Block Post 5deg. x2

A700-SWB11

A12X 1/12-Scale Electric On-Road Car The A12X brings its design slightly more towards traditional 12th scale cars where side and rear spring actio...

AM279 Rear Belt Tensioner Awesomatix AM279 Rear Belt Tensioner for A800R.  Mounted on the chassis, right behind the motormount.  Further redu...

ST206-F FSS Nut - within FSS - Forward Shifted Servoholder set

TW5 Tungsten Weight 5g. 5g. Weight made from Tungsten Material.  Fits into C01B-RAF Flex Alloy chassis pockets. contains:  1pcs TW5

FD - Flex Damper set 1. FD set provides an additional torsional flex of the car's end where it is installed. 2. FD set provides the adjustable da...

Made for asphalt testing out of 1.5mm G10 fiber glass. Uses the same shape as A800-C127S. There are not recessed holes for the ST019 screws.

P138A-LF 38T Pulley Low Friction P138A-LF 38T Pulley. Replaces P138LF and P138LFA More precise. Narrow profile For A800 / A800X / A800MMX / A800R...

FSS - Forward Shifted Servoholder set This set also allows the ESC to be placed in front of the motor to reduce the car's moment of inertia. FSS ...

C07-RF Flex Carbon Bumper The Flex Carbon Bumper is designed for use with P14-1-R Lower bumper. Requires two pcs ST019 (not included) to connec...

C01B-RAF Flex Alloy Lower Deck Awesomatix C01B-RAF Flex Alloy Lower Deck. 2.0mm 7075 T6 Flex Alloy Chassis for A800R car kit. Flex version wit...

AT03R Spool Axle New spool design with reduced weight (only 2,6g.) and improved rigidity. Only compatible with P138A / P138A-LF Pulley (3pcs SC2x...

AM180EVO2 SB Bellcrank AM180EVO2 SB Bellcrank for the Single Bellcrank Steering. The EVO2 version is an updated design of the EVO version and featu...

AM14H Steering Arm x 2 AM14H Steering Arms are a special stronger version of the AM14LS steering arms (same footprint).  Recommended to use when ra...

Our brand new Roll Centre Shim Plates for Awesomatix A800R are constructed from carbon fibre and make changing the lower roll centre on your Aweso...

MR33 Awesomatix A800FX Evo Aluminium Bulkhead Set Rear (2) These rear aluminium bulkheads from MR33 give your Awesomatix A800FX Evo more stability...

This is a bearing kit by Avid RC for the Awesomatix A800. Optional Bearings Bearing Kit doesn't include the steering rack or belt tensioner bear...

Extra flat and compact 10g Tungsten weight for Awesomatix A800MMX. The weight can be placed exactly in the mirrored motor recess under the battery...