Car Accessories

Tworks 64 Grade Titanium and Alloy screw sets. Select Vehicle in drop down menu.

TE-101 Machined 1.6 x 2 Shock Pistons ( Xray XB4 /XB2C 2018) TE-102 Machined 1.7 x 2 Shock Pistons ( Xray XB4/XB2C 2018 )

TP-023 64 Titanium Shock Mount 4pcs. (For Team Losi 22-4/22/22 RTR/22T/22 SCT/22 2.0)

TE-107 1/10 Touring Car and 2WD Buggy Tire Holder 100mm 4pcs.

This is a set of four JConcepts Mono 12mm Hex Wheels, and are intended for use with the Team Associated T4.1 1/10 scale stadium tru...

Team Associated is pleased to introduce 12mm hex drive parts for the RC10T4 series of trucks! To convert your truck to use the new front ax...

Team Associated 12mm Springs.

This is a pack of two Pro-Line Prime T 2.2" Off-Road Truck Tires. Pro-Line’s Prime tires are targeted directly at racers currently ...

Kimbrough Products 48 Pitch spur gears are molded with black 4/6 Nylon plastic, because black dissipates heat into the air better t...

Battles can be won or lost in the famed Octagon and JConcepts pulled a ringer into the fight with an innovative 2.2 buggy race tire. When it come...

The Hudy 14-20mm Ride Height Gauge is a high-quality, adjustable, and easy to use ride height gauge, perfect for measuring ride height on 1/10 off-...

Axon World Spec HLS Springs.

Axon Spur Gear for TC

The Pro-Line Inversion is essentially an inverted Positron tread design that has been developed for tracks where ghost pins or almost slicks are id...

This is the Yokomo 30mm Racing Performer Cooling Fan. This 30mm long by 30mm wide fan is 10mm thick and is suitable for on-road and off-road applic...

This ProTek R/C Aluminum Ball Stud Washer Set includes 3x5.5mm Black anodized aluminum washers in the following thicknesses: 0.5mm, 1.0mm and 2.0mm...

This is a pack of three Pro-Line Pro-Bond Glue Tips, and are intended for use with Pro-Line Pro-Bond Tire Glue (PRO6031-00). Pro-Line Pro-Bond Yell...

his ProTek R/C 1S 3000mAh LiPo transmitter pack was developed specifically for the Airtronics/Sanwa MT-44 transmitter. This light weight LiPo batte...

This is the ProTek R/C "TruTemp" Infrared Thermometer. Any temp gun can give you a reading, but the accuracy of that reading is always questioned -...

This is the ProTek R/C Carbon Fiber Soldering Jig. This small and lightweight carbon fiber jig is designed to quickly and easily hold your wires, D...

This ProTek R/C Clamping Servo horn is designed for Team Associated 1/10 scale off-road vehicles and is machined from a solid block of aluminum all...

AVID RC  bearings.

Made in the USA from custom blend low-noise material: Most spur gears in the industry are made from material with glass fibers embedded inside to ...

This is a pack of two Pro-Line Pin Point Carpet 2.2" Rear Buggy Tires. Indoor Carpet Off-Road Racing is a growing segment of the racing scene and P...

The Pro-Line Prism Carpet 2.2" Rear Buggy Tires feature 1,260 Ultra-Sharp Prism shaped Pins laid out in a unique pattern that grip the carpet bette...

This is a pair of Wedge  Buggy Front Carpet Tires. Indoor Carpet Off-Road Racing is a growing segment of the racing scene and Pro-Line is ready to ...

This is a set of two Pro-Line Velocity 2.2”  Wheels with 12mm Hex.  Pro-Line has you covered with ultra-lightweight and durable rear racing wheels ...

Pro-Line Prism T Carpet 2.2" Truck Tires feature 1,440 Ultra-Sharp Prism shaped Pins laid out in a unique pattern that grip the carpet better than ...

This is a pack of two Pro-Line Prime SC 2.2/3.0" Short Course Truck Tires. Pro-Line’s Prime tires are targeted directly at racers currently running...

These turnbuckles are CNC machined and thread rolled from domestic US 6AL/4V grade titanium. If you want to put your car on a diet, this is one of ...

Avid Revolution Bearing Kit for Tamiya Euro Truck.

Satellite Front  and Rear Buggy Wheel fits the Kyosho RB6* and AE B6. Buggy racers around the world will appreciate the engineering, looks, and per...

Introducing our latest 2S complete charge cable with molded strain relief. This new cable has the same features found in our standard 2S cable li...

This is a pack of four Arrowmax 4mm Aluminum 1/10 Set-Up System Wheel Nuts. These can be used to secure your 4mm axle equipped vehicle into a setup...

 MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarb...

This is a replacement XRAY 4.9mm Aluminum Ball End Set, and is intended for use with the XRAY T2 '09, and T3 vehicles. These ball ends are the same...

This is an optional XRAY 1.0mm XB2 Anti-Roll Bar Set, including a 1.0mm bar and the necessary mounting hardware. 

B6 Front Bulkhead assembly

FT Aluminum Servo Horn 23T, 15.5 mm FT Aluminum Servo Horn 25T, 15.5 mm

B6 FT Blue Aluminum Rear Hubs The new Factory Team aluminum rear hubs offer the ability to run 67mm CVA bones for increased rear support under low...

XRAY 2 Hole Piston, 1.6mm, Flat XRAY 2 Hole Piston, 1.7mm, Flat XRAY 3x1.4 Piston, Flat CNC Machined Delrin (TM), perfectly round Tight fit to sho...

Factory Team Fluid Carrier This handy carrier will transport 16 of your favorite fluid bottles in neat compartments. The zipper enclosure keeps co...

This is a pack of two replacement Traxxas 30° Caster Blocks. Package includes left and right side caster blocks.

This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles.

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing cho...

This is a replacement Team Associated T5M Front Arm Set. This set includes a left and right side arm. 

This is a replacement Team Associated T5M Rear Arm Set. This set includes a left and right side arm. 

Racers Edge Tire Tuning Scissors for cutting pins.