MR33 Circle Droop Gauge Springway Theory V2

The MR33 Circle Droop Gauge V2 makes measuring and setting the throw suspension (droop) on your 1:10 touring car or FWD model even more precisely than ever before!

Why is it so?
The two small aluminium wheels (and very conveniently integrated in the Droop Gauge) are screwed onto the wheel axles of your vehicle.
The spring path is then measured at the lower edge of the aluminium wheels.
The measurement is then more accurate because you always measure at the center of the wheel axle, and tolerances in wheel carriers, wishbones, and other components of your vehicle no longer play a role.

How do I compare the values with my "old" droop values?
The new MR33 Circle Droop Gauge V2 is graded in 0.2mm increments and has a measuring range of 21.0 - 25.0mm.
To compare these values with the conventional old known spring routes of your current vehicle (e.g. 4.0 or 6.0), you simply need to perform a comparison measurement. You can then write these values, for example, a small table so that you always quickly point the values of the "new" measurement theory with those of the "old" one at the race track.

What is included in the delivery?
MR33 Circle Droop Gauge V2
2 screwable aluminum wheels

What else is needed for measuring the spring route?
10mm Droop blocks on which the vehicle is put during the measurement process (e.g. MR33-DB)